my Tesla Model Y Current (2020-present) has a check engine light and is shaking

Tesla Model Y Current (2020-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

457 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix the check engine light and shaking issue in Tesla Model Y (2020-present). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Electrical

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the 12V battery before working on electrical systems.
•Allow the vehicle to cool down before inspecting the drivetrain components.

Symptoms

•Check engine light illuminated
•Vehicle shaking or vibrating during acceleration
•Reduced power output
•Unusual noises from the drivetrain
•Poor acceleration response

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify specific issues.
2
Inspect the vehicle’s battery status and performance metrics via the Tesla app or onboard diagnostics.
3
Check the condition of the tires for uneven wear or improper inflation.
4
Perform a visual inspection of the suspension components for any signs of damage or wear.
5
Test the motor and inverter performance metrics using diagnostic tools.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Torque wrench
•Tire pressure gauge

Parts Required

•Replacement tires (if necessary)
•Suspension components (if any are damaged)
•Battery (if health check indicates replacement)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify specific issues.
2
Inspect the vehicle’s battery status and performance metrics via the Tesla app or onboard diagnostics.
3
Check the condition of the tires for uneven wear or improper inflation.
4
Perform a visual inspection of the suspension components for any signs of damage or wear.
5
Test the motor and inverter performance metrics using diagnostic tools.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and the parking brake is engaged.
Disconnect the 12V battery to ensure safety while working on electrical components.

2. Address Error Codes

Connect the OBD-II scanner and note down any error codes.
Clear the error codes and perform a test drive to check if they return.
If codes related to the battery or drivetrain persist, focus on those components.

3. Inspect and Replace Worn Components

Inspect Tires:
- Check tire pressure and adjust to manufacturer specifications.
- Look for uneven wear; replace any worn tires.
Inspect Suspension:
- Check for loose or damaged components (e.g., struts, shocks, control arms).
- Replace any defective components according to specifications.

4. Battery and Drivetrain Check

Battery:
- Check battery voltage and health using a multimeter.
- If necessary, replace the battery or contact Tesla service for a battery health check.
Drivetrain:
- Inspect for any loose connections or damaged wiring in the motor and inverter.
- Ensure that all bolts and connections are torqued to specifications.