how to reset my Tesla Model Y Current (2020-present) check engine light?

Tesla Model Y Current (2020-present)

Error Codes

15-30 minutes

Time

medium

Difficulty

medium

Severity

2 min read

369 words

Problem Statement

Learn how to reset the check engine light on your Tesla Model Y (2020-present) with step-by-step instructions and diagnostic tips.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked and stationary before performing any resets or diagnostics.

Symptoms

•Check engine light illuminated on the dashboard
•Potential reduction in vehicle performance
•No noticeable changes in driving feel or functionality
•Possible alerts on the vehicle's touchscreen regarding diagnostics
•Increased energy consumption or abnormal battery usage

Diagnostic Steps

1
Open the Tesla app and check for any diagnostic messages or alerts.
2
Connect a compatible OBD-II scanner to check for error codes.
3
Review the vehicle’s status in the touchscreen under 'Service' to identify any specific issues.
4
Reset the vehicle's systems by performing a soft reset.
5
If the check engine light remains after the reset, consider consulting Tesla service for further diagnostics.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner

Parts Required

•None required for resetting the check engine light

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Open the Tesla app and check for any diagnostic messages or alerts.
2
Connect a compatible OBD-II scanner to check for error codes.
3
Review the vehicle’s status in the touchscreen under 'Service' to identify any specific issues.
4
Reset the vehicle's systems by performing a soft reset.
5
If the check engine light remains after the reset, consider consulting Tesla service for further diagnostics.

Solution

1. Soft Reset of the Vehicle

Ensure the vehicle is in park and stationary.
Press and hold the two scroll wheels on the steering wheel until the touchscreen turns off.
Wait for approximately 10 seconds until the Tesla logo appears, then release the scroll wheels.
Allow the system to reboot fully (approximately 1-2 minutes) before checking the dashboard.

2. Clear Fault Codes (if applicable)

Connect the OBD-II scanner to the vehicle's diagnostic port.
Follow the scanner's instructions to read and note any stored fault codes.
Use the scanner's functionality to clear the fault codes.
Disconnect the OBD-II scanner from the vehicle.