how to replace Tesla Model Y Current (2020-present) key fob battery

Tesla Model Y Current (2020-present)

Error Codes

15-30 minutes

Time

easy

Difficulty

low

Severity

3 min read

492 words

Problem Statement

Learn how to replace the key fob battery for Tesla Model Y (2020-present). Step-by-step guide with symptoms, diagnostic steps, and tools required.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Handle the key fob gently to avoid damaging the internal components during battery replacement.

Symptoms

•Key fob does not unlock or lock the doors
•Key fob fails to start the vehicle
•Weak signal indicated by longer response times
•Warning message on the vehicle’s display regarding key fob battery
•Physical damage or wear on the key fob casing

Diagnostic Steps

1
Inspect the key fob for physical damage, such as cracks or broken components.
2
Attempt to unlock the vehicle using the key fob from different distances to assess signal strength.
3
Check for any error messages on the vehicle’s display related to the key fob.
4
Verify that the vehicle recognizes the key fob by trying to start the vehicle with the fob present.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Small flathead screwdriver
•Coin

Parts Required

•CR2032 battery

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the key fob for physical damage, such as cracks or broken components.
2
Attempt to unlock the vehicle using the key fob from different distances to assess signal strength.
3
Check for any error messages on the vehicle’s display related to the key fob.
4
Verify that the vehicle recognizes the key fob by trying to start the vehicle with the fob present.

Solution

1. Preparation

Gather necessary tools: small flathead screwdriver or a coin.
Ensure you are in a well-lit area to work on the key fob.

2. Open the Key Fob

Use the small flathead screwdriver or coin to gently pry apart the two halves of the key fob.
Begin at the seam where the two halves meet, applying gentle pressure to avoid damaging the casing.

3. Remove the Old Battery

Once the key fob is opened, locate the battery.
Carefully lift the battery out of its compartment, noting the orientation (positive side facing up or down).

4. Install the New Battery

Insert the new CR2032 battery into the compartment, ensuring it is oriented in the same direction as the old battery (positive side facing the correct way).
Press down gently to secure the battery in place.

5. Reassemble the Key Fob

Align the two halves of the key fob and press them together until they snap into place.
Ensure there are no gaps and that the fob feels securely closed.

6. Test the Key Fob

Approach the vehicle and test the key fob by locking and unlocking the doors and starting the vehicle to confirm the repair is successful.