how to fix Tesla Model Y Current (2020-present) when it shakes at idle

Tesla Model Y Current (2020-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

483 words

Problem Statement

Learn how to diagnose and fix shaking at idle in Tesla Model Y (2020-present). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Electrical

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the 12V battery before working on electrical components.
•Ensure the vehicle is secure on a flat surface during repairs.

Symptoms

•Shaking or vibrations noticeable while the vehicle is in park or neutral
•Unusual noise accompanying the vibrations
•Dashboard warning lights illuminated (if applicable)
•Decreased cabin comfort
•Possible increase in power consumption or reduced range

Diagnostic Steps

1
Check for error codes using an OBD-II scanner or Tesla diagnostic tool.
2
Inspect the electric drive unit for physical damage or loose connections.
3
Verify tire pressure and condition to rule out wheel imbalance.
4
Examine the vehicle’s suspension components for wear or damage.
5
Assess the battery health using Tesla's software diagnostics.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Tire pressure gauge
•Socket set
•Torque wrench

Parts Required

•Replacement bushings or suspension components (if worn)
•Fasteners or connectors (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check for error codes using an OBD-II scanner or Tesla diagnostic tool.
2
Inspect the electric drive unit for physical damage or loose connections.
3
Verify tire pressure and condition to rule out wheel imbalance.
4
Examine the vehicle’s suspension components for wear or damage.
5
Assess the battery health using Tesla's software diagnostics.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and engaged in park (P).
Disconnect the 12V battery as a safety precaution.

2. Inspect Electric Drive Unit

Sub-step 1: Remove any covers obstructing access to the electric drive unit.
Sub-step 2: Visually inspect for loose bolts or connections. Tighten any loose fasteners to manufacturer specifications.
Sub-step 3: Check for any visible signs of wear, such as frayed wires or damaged connectors.

3. Check Tire Condition and Pressure

Sub-step 1: Inspect all tires for uneven wear or damage.
Sub-step 2: Use a tire pressure gauge to check each tire’s pressure; adjust to the manufacturer's recommended levels.
Sub-step 3: Rotate tires if uneven wear patterns are detected.

4. Examine Suspension Components

Sub-step 1: Inspect control arms, bushings, and struts for signs of wear or damage.
Sub-step 2: Replace any worn components with OEM parts.
Sub-step 3: Ensure all bolts are torqued to specification.

5. Reconnect Battery and Test Drive

Sub-step 1: Reconnect the 12V battery.
Sub-step 2: Start the vehicle and allow it to idle to check if the shaking persists.
Sub-step 3: Test drive the vehicle to ensure the issue is resolved.