how to clear codes on my Tesla Model Y Current (2020-present)

Tesla Model Y Current (2020-present)

Error Codes

10-15 minutes

Time

easy

Difficulty

medium

Severity

2 min read

365 words

Problem Statement

Learn how to clear diagnostic trouble codes on your Tesla Model Y (2020-present) with this step-by-step guide. Ensure your vehicle runs smoothly.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe and stationary position before performing any actions on the touchscreen.

Symptoms

•Check engine light illuminated
•Vehicle performance issues (if any codes indicate such)
•Alerts on the instrument cluster related to specific systems
•Notifications in the Tesla app regarding faults

Diagnostic Steps

1
Ensure the vehicle is in 'Park' mode.
2
Access the Tesla touchscreen display.
3
Navigate to the 'Controls' menu on the touchscreen.
4
Select 'Service' from the menu options.
5
Choose 'Clear All DTCs' or 'Reset Faults' option.
6
Confirm the action when prompted on the screen.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for this procedure

Parts Required

•None required for this procedure

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Make sure the vehicle is stationary and in "Park."
Ensure the vehicle is powered on and the touchscreen is functioning properly.

2. Accessing the Touchscreen

Locate the touchscreen display in the center console.
Tap on the "Controls" icon at the bottom of the screen.

3. Navigating to Service

From the "Controls" menu, scroll to find and select "Service."
Wait for the service menu to load completely.

4. Clearing Codes

Look for the "Clear All DTCs" or "Reset Faults" option within the Service menu.
Tap the option and follow any on-screen prompts to confirm.

5. Finalizing

Once the codes are cleared, verify the absence of alerts on the instrument cluster.
If necessary, perform a soft reset of the vehicle by holding down the two scroll wheels on the steering wheel until the screen reboots.