How can I fix the “Automatic Emergency Braking” not working issue in my Model Y?

Tesla Model Y Current (2020-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

4 min read

683 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix the Automatic Emergency Braking (AEB) issue in your Tesla Model Y with step-by-step instructions and required tools.

Affected Component

Automatic Emergency Braking (AEB) system

Estimated Time

2-4 hours

Symptoms

•Warning Messages
•Lack of Activation
•Camera/ Sensor Issues
•Other Safety Features Disabled

Diagnostic Steps

1
Check for Software Updates
2
Inspect Cameras and Sensors
3
Check System Settings
4
Retrieve Diagnostic Codes

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tesla Mobile App or Vehicle Display
•Clean cloth
•Mild cleaning solution
•Flashlight
•Socket set
•Torx bits
•Multimeter
•OBD-II scanner
•Alignment tools

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Fixing Automatic Emergency Braking (AEB) Not Working in Tesla Model Y

The Automatic Emergency Braking (AEB) system in your Tesla Model Y is a critical safety feature designed to prevent or mitigate collisions. If the AEB is not functioning, it’s important to address the issue promptly. Below are the symptoms, diagnostic steps, tools required, and detailed repair instructions.

Step 1: Check for Software Updates

Tools Required: Tesla Mobile App or Vehicle Display
Instructions:
1. Open the Tesla app or vehicle display.
2. Navigate to ‘Software’ settings.
3. Check for any available software updates and install if necessary.
4. Restart the vehicle to ensure updates take effect.

Step 2: Inspect Cameras and Sensors

Tools Required: Clean cloth, mild cleaning solution, flashlight
Instructions:
1. Inspect the forward-facing camera and ultrasonic sensors located around the front bumper.
2. Clean any dirt, debris, or obstructions that may be affecting the camera or sensor visibility.
3. Use a flashlight to check for any visible damage to the lenses.

Step 3: Check System Settings

Tools Required: Tesla Mobile App or Vehicle Display
Instructions:
1. Go to ‘Controls’ > ‘Autopilot’ in the vehicle display.
2. Ensure that AEB and related features are enabled.
3. If they are disabled, enable them and perform a test drive to check functionality.

Step 4: Retrieve Diagnostic Codes

Tools Required: Tesla Mobile App or Vehicle Display
Instructions:
1. Access the ‘Service’ menu from the vehicle display.
2. Look for any diagnostic codes related to the AEB system.
3. Record any error codes for further reference or repairs.

Repair Instructions

Step 1: Reboot the Vehicle

Tools Required: None
Instructions:
1. To reboot the vehicle, press and hold both scroll wheels on the steering wheel until the screen goes black and the Tesla logo appears.
2. Allow the system to reboot, which may resolve temporary glitches.

Step 2: Hardware Inspection

If AEB still does not work after the above checks:

Tools Required: Socket set, Torx bits, multimeter, OBD-II scanner (if further diagnostics needed)
Instructions:
1. Inspect Wiring: Check the wiring harness connecting the AEB sensors and cameras. Look for frays, disconnects, or corrosion.
2. Check Sensor Alignment:
  - If you suspect misalignment, use a level to ensure that the sensors and cameras are properly positioned.
  - Adjust as necessary.
3. Replace Faulty Components:
  - If diagnostic codes indicate a specific sensor failure, replace that component.
  - Disconnect the battery (negative terminal) before starting any replacement work to avoid electrical shorts.
  - Remove the faulty sensor or camera using the appropriate tools, replace it with a new part, and reconnect it.

Step 3: Calibration

Tools Required: Alignment tools (if necessary), OBD-II scanner
Instructions:
1. After any component replacement, ensure to re-calibrate the sensors.
2. Use an OBD-II scanner to run a calibration process if available.
3. Follow on-screen prompts or Tesla service manual instructions for calibration.

Step 4: Test Drive

Tools Required: None
Instructions:
1. Perform a test drive in a safe area.
2. Observe if the AEB system activates properly when approaching simulated obstacles.
3. Monitor the vehicle dashboard for any warning messages.

Step 5: Consult Tesla Service Center

If the issue persists after all troubleshooting and repairs:

Instructions:
1. Schedule an appointment with a Tesla Service Center.
2. Provide them with any diagnostic codes and details of the troubleshooting steps taken.

Conclusion

By following the above steps, you should be able to diagnose and potentially fix the AEB issue in your Tesla Model Y. Remember, safety is paramount, and if in doubt, consult a professional technician.