why is my Tesla Model S Plaid's rear view mirror shaking

Tesla Model S Plaid/Refresh (2021-present)

Error Codes

1 hour

Time

medium

Difficulty

medium

Severity

3 min read

442 words

Problem Statement

Learn how to diagnose and fix a shaking rear view mirror in Tesla Model S Plaid. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Body/Interior

Estimated Time

1 hour

⚠️ Safety Warnings

Important safety information - read before proceeding

•Be cautious when working near the windshield to avoid injury.

Symptoms

•Rear view mirror visibly vibrating during driving
•Increased road noise from the rear
•Possible loose or rattling sound near the mirror
•Difficulty seeing clearly through the mirror due to movement

Diagnostic Steps

1
Inspect the rear view mirror attachment to the windshield for looseness.
2
Check for any visible cracks or damage on the windshield around the mirror mount.
3
Verify the tightness of the mirror adjustment screws, if applicable.
4
Examine the rear view mirror for signs of internal damage or wear.
5
Test drive the vehicle to observe if the shaking persists at various speeds and road conditions.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Flathead screwdriver
•Torx screwdriver
•Cleaning cloth

Parts Required

•Replacement mirror assembly

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the rear view mirror attachment to the windshield for looseness.
2
Check for any visible cracks or damage on the windshield around the mirror mount.
3
Verify the tightness of the mirror adjustment screws, if applicable.
4
Examine the rear view mirror for signs of internal damage or wear.
5
Test drive the vehicle to observe if the shaking persists at various speeds and road conditions.

Solution

1. Preparation

Tools Required: Flathead screwdriver, Torx screwdriver (if applicable), cleaning cloth
Ensure the vehicle is parked on a level surface and the engine is off.

2. Inspect and Tighten the Mirror

If the mirror is attached with screws:
1. Use the appropriate screwdriver to gently tighten the screws securing the rear view mirror to the windshield.
2. Be careful not to overtighten, as this could damage the mount or windshield.

3. Clean the Mounting Area

Wipe down the area where the mirror attaches to the windshield with a cleaning cloth to remove any debris or dirt that may interfere with the bond.
Ensure the area is dry before reattaching.

4. Check for Damage

Inspect the mirror itself for cracks or structural damage.
If damage is found, the mirror assembly may need to be replaced.

5. Reassemble and Test

If any components were removed or adjusted, reassemble everything securely.
Take the vehicle for a test drive to ensure the rear view mirror is stable and no longer shaking.