why is my Tesla Model S Plaid/Refresh (2021-present) battery draining overnight

Tesla Model S Plaid/Refresh (2021-present)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

2 min read

368 words

Problem Statement

Discover how to diagnose and resolve battery drain issues in Tesla Model S Plaid. Step-by-step guide with diagnostic steps and solutions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe and secure location while making adjustments

Symptoms

•Battery percentage drops significantly overnight
•Cabin temperature settings are not maintained
•Unusual notifications from the vehicle's software
•Increased energy consumption reported on the dashboard
•Check for background applications consuming power

Diagnostic Steps

1
Access the vehicle's energy consumption report via the touchscreen
2
Check for software updates and install if available
3
Examine the settings for 'Always connected' features and energy-saving options
4
Review any third-party applications that may be running in the background
5
Inspect for any active features like Sentry Mode or Cabin Overheat Protection that could be consuming power

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tesla mobile app

Parts Required

•None required for this issue.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Access the vehicle's energy consumption report via the touchscreen
2
Check for software updates and install if available
3
Examine the settings for 'Always connected' features and energy-saving options
4
Review any third-party applications that may be running in the background
5
Inspect for any active features like Sentry Mode or Cabin Overheat Protection that could be consuming power

Solution

1. Preparation

Ensure the vehicle is parked in a safe location.
Make sure the vehicle is in "Park" mode.

2. Update Software

Navigate to the 'Software' section on the touchscreen.
Check for any available updates and proceed with the installation.
Allow the vehicle to reboot if prompted.

3. Adjust Settings

Go to 'Settings' > 'Energy' > 'Energy Saving'.
Disable features such as Sentry Mode or Cabin Overheat Protection if not needed.
Ensure that "Always Connected" is set to the desired state.

4. Inspect Background Applications

Check for any third-party applications connected to the vehicle.
Remove or disable any unnecessary applications.

5. Monitor Energy Consumption

Drive the vehicle for a short distance to check real-time energy consumption.
Re-evaluate the energy consumption report for anomalies.