why does my Tesla Model S Plaid/Refresh (2021-present) display a warning about low tire pressure

Tesla Model S Plaid/Refresh (2021-present)

Error Codes

30 minutes - 1 hour

Time

medium

Difficulty

medium

Severity

3 min read

535 words

Problem Statement

Learn how to diagnose and fix low tire pressure warning in Tesla Model S Plaid. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

30 minutes - 1 hour

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always perform tire maintenance when the tires are cold to ensure accurate pressure readings.

Symptoms

•Tire pressure warning light illuminated on the dashboard
•Possible reduction in vehicle handling or stability
•Decreased range due to increased rolling resistance
•Potential uneven tire wear
•Warning message displayed on the center console

Diagnostic Steps

1
Check the tire pressure of all four tires using a reliable tire pressure gauge.
2
Verify the specifications for the recommended tire pressure from the vehicle's owner manual or the driver’s side door jamb label.
3
Inspect the tires for visible damage, such as cuts, punctures, or sidewall bulges.
4
Look for any signs of air leakage around the valve stems or bead area of the tires.
5
Use the vehicle’s touchscreen to check for any additional diagnostic messages related to the tires.
6
Reset the tire pressure monitoring system (TPMS) if applicable after adjustments.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Air compressor
•Basic tire repair kit

Parts Required

•Tire patches or plugs (if repairs are necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the tire pressure of all four tires using a reliable tire pressure gauge.
2
Verify the specifications for the recommended tire pressure from the vehicle's owner manual or the driver’s side door jamb label.
3
Inspect the tires for visible damage, such as cuts, punctures, or sidewall bulges.
4
Look for any signs of air leakage around the valve stems or bead area of the tires.
5
Use the vehicle’s touchscreen to check for any additional diagnostic messages related to the tires.
6
Reset the tire pressure monitoring system (TPMS) if applicable after adjustments.

Solution

1. Preparation

Gather necessary tools: tire pressure gauge, air compressor (if needed), and basic tire repair kit.
Ensure the vehicle is parked on a level surface and apply the parking brake.

2. Check and Inflate Tires

Remove the valve stem caps from each tire.
Use the tire pressure gauge to measure the current pressure in each tire.
Compare the measured pressure with the recommended tire pressure.
If any tire is under-inflated:
- Connect the air compressor to the valve stem.
- Inflate the tire to the recommended pressure, checking periodically with the gauge.
Replace the valve stem caps securely after inflating.

3. Inspect and Repair (if necessary)

Visually inspect each tire for damage:
- Look for punctures, cracks, or foreign objects embedded in the tread.
If a puncture is found:
- Remove the object if possible and assess if it can be plugged.
- Use a tire patch or plug kit to seal small punctures, following the kit instructions.
- For significant damage, consider replacing the tire.

4. Reset TPMS

After correcting any tire pressure issues, go to the vehicle settings on the touchscreen.
Navigate to the "Tires" section and select the option to reset the TPMS.
Confirm the reset and allow the system to recalibrate.