how to reset the Tesla Model S Plaid tire pressure monitoring system

Tesla Model S Plaid/Refresh (2021-present)

Error Codes

30 minutes

Time

easy

Difficulty

medium

Severity

2 min read

377 words

Problem Statement

Learn how to reset the tire pressure monitoring system (TPMS) in your Tesla Model S Plaid. Step-by-step guide to ensure accurate tire pressure readings.

Affected Component

Electrical

Estimated Time

30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe, stationary position while performing the reset.

Symptoms

•Tire pressure warning light illuminated on the dashboard
•Inaccurate tire pressure readings displayed
•System not recognizing new tire pressure settings after inflation

Diagnostic Steps

1
Ensure all tires are inflated to the recommended pressure specified on the driver's door jamb label.
2
Power on the vehicle without starting the engine.
3
Access the settings menu on the touchscreen display.
4
Navigate to 'Service' and select 'Tire Pressure Monitoring.'
5
Look for the option to reset or calibrate the TPMS.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required, but a tire pressure gauge may be useful.

Parts Required

•None required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure all tires are inflated to the recommended pressure specified on the driver's door jamb label.
2
Power on the vehicle without starting the engine.
3
Access the settings menu on the touchscreen display.
4
Navigate to 'Service' and select 'Tire Pressure Monitoring.'
5
Look for the option to reset or calibrate the TPMS.

Solution

1. Preparation

Ensure all tires are at the correct pressure.
Verify that the vehicle is on a level surface.

2. Access Settings

Power on the Vehicle: Press the brake pedal to power up the vehicle's systems.
Open Touchscreen Menu: Tap on the 'Control' icon (gear icon) on the bottom corner of the touchscreen.

3. Navigate to TPMS Settings

Select 'Service': From the dropdown menu, tap on 'Service.'
Choose 'Tire Pressure Monitoring': Find and select 'Tire Pressure Monitoring' from the options.

4. Reset the TPMS

Select 'Reset' Option: Locate the option to reset or calibrate the TPMS.
Confirm Reset: Follow the prompts to confirm the reset of the tire pressure monitoring system.

5. Final Step

Drive the Vehicle: Take the vehicle for a short drive (approximately 10-15 minutes) to allow the system to calibrate.