how to reset the check engine light in Tesla Model S Plaid/Refresh (2021-present)

Tesla Model S Plaid/Refresh (2021-present)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

413 words

Problem Statement

Learn how to reset the check engine light in Tesla Model S Plaid/Refresh (2021-present). Step-by-step guide with diagnostic procedures and solutions.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe and stationary position before performing any resets or diagnostics.

Symptoms

•Check engine light illuminated on the dashboard
•Possible reduced performance mode activated
•Alerts or notifications displayed on the vehicle's screen
•No immediate mechanical issues observed

Diagnostic Steps

1
Check for any active error messages on the vehicle's touchscreen.
2
Use the Tesla app or vehicle interface to review the vehicle’s diagnostic logs.
3
Verify if any software updates are available for the vehicle.
4
Ensure the vehicle's charging port is securely closed, as this can sometimes trigger alerts.
5
Perform a soft reboot of the vehicle's systems by holding down both scroll wheels on the steering wheel.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tesla mobile app (optional for diagnostics)
•Vehicle touchscreen interface

Parts Required

•No parts are required for resetting the check engine light.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check for any active error messages on the vehicle's touchscreen.
2
Use the Tesla app or vehicle interface to review the vehicle’s diagnostic logs.
3
Verify if any software updates are available for the vehicle.
4
Ensure the vehicle's charging port is securely closed, as this can sometimes trigger alerts.
5
Perform a soft reboot of the vehicle's systems by holding down both scroll wheels on the steering wheel.

Solution

1. Preparation

Ensure the vehicle is parked in a safe, well-ventilated area.
Make sure the vehicle is in "Park" mode.

2. Soft Reboot of Vehicle Systems

Locate Scroll Wheels: Identify the scroll wheels on the steering wheel.
Perform Reboot: Press and hold both scroll wheels simultaneously for about 10 seconds until the touchscreen goes black and the Tesla logo appears.
Wait for Reboot: Allow the vehicle to restart completely. This may take a few moments.

3. Clear Diagnostic Codes (If Applicable)

Access Diagnostics: If the check engine light persists, access the Diagnostics menu via the touchscreen.
Check for Errors: Review the error codes displayed and take note of any that may indicate a specific issue.
Factory Reset (If Necessary): If the light remains after resolving issues, navigate to "Service" > "Factory Reset." Confirm and follow the prompts to reset the vehicle settings, which should clear the check engine light.