how to reset lane departure warning system in Tesla Model S Original (2012-2020)

Tesla Model S Plaid/Refresh (2021-present)

Error Codes

30 minutes to 1 hour

Time

medium

Difficulty

medium

Severity

3 min read

470 words

Problem Statement

Learn how to reset the Lane Departure Warning system in Tesla Model S (2012-2020). Step-by-step guide with symptoms, diagnostic steps, and solutions.

Affected Component

Electrical

Estimated Time

30 minutes to 1 hour

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and in 'Park' mode during resets and inspections.

Symptoms

•Lane Departure Warning light illuminated on the dashboard
•Unresponsive lane guidance features
•Alerts not functioning or inconsistent
•Inability to adjust lane departure settings in the menu
•Sudden deactivation of lane departure warnings during driving

Diagnostic Steps

1
Check if the vehicle's software is up to date by accessing the software menu.
2
Verify the settings of the Lane Departure Warning system in the vehicle's settings menu.
3
Perform a soft reset of the vehicle by holding down the scroll wheels on the steering wheel until the screen resets.
4
Inspect the cameras and sensors for obstructions or damage that could affect functionality.
5
Run a diagnostics check via the Tesla service mode if available.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle's touchscreen interface

Parts Required

•None required for resetting.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check if the vehicle's software is up to date by accessing the software menu.
2
Verify the settings of the Lane Departure Warning system in the vehicle's settings menu.
3
Perform a soft reset of the vehicle by holding down the scroll wheels on the steering wheel until the screen resets.
4
Inspect the cameras and sensors for obstructions or damage that could affect functionality.
5
Run a diagnostics check via the Tesla service mode if available.

Solution

1. Software Update

Ensure the vehicle is connected to Wi-Fi.
Navigate to "Software" in the main menu and check for any available updates.
If an update is available, follow the prompts to install it.

2. Resetting the Lane Departure Warning System

Navigate to "Controls" > "Autopilot" > "Lane Departure Warning".
Toggle the Lane Departure Warning feature off and then back on.
Confirm any prompts to reset the system settings.

3. Soft Reset of the Vehicle

Ensure the vehicle is parked and in "Park" mode.
Press and hold both scroll wheels on the steering wheel until the touchscreen goes black and the Tesla logo appears.
Release the scroll wheels and wait for the system to reboot.

4. Check and Clean Sensors

Inspect the front-facing camera and side cameras for dirt or obstructions.
Clean the lenses gently with a microfiber cloth if necessary.
Ensure there are no physical obstructions near the sensors.