how to replace the wiper blades on my Tesla Model S Original (2012-2020)

Tesla Model S Plaid/Refresh (2021-present)

Error Codes

15-30 minutes

Time

easy

Difficulty

low

Severity

2 min read

388 words

Problem Statement

Step-by-step guide to replace wiper blades on Tesla Model S (2012-2020). Learn symptoms, diagnostic steps, and installation instructions.

Affected Component

Body/Interior

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is turned off before performing maintenance on the wipers.

Symptoms

•Streaking on the windshield while using wipers
•Wipers skipping or chattering across the glass
•Unusual noises during wiper operation
•Wipers not making full contact with the windshield
•Cracked or torn rubber on the wiper blades

Diagnostic Steps

1
Inspect the wiper blades for visible wear or damage.
2
Check the windshield for any residue or contaminants that might affect wiper performance.
3
Test the wiper operation to confirm functionality and assess performance.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ensure the vehicle is parked in a safe location with the ignition turned off.
•Lift the wiper arms away from the windshield until they are in a vertical position.

Parts Required

•New wiper blades (specific to Tesla Model S)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required: None
Ensure the vehicle is parked in a safe location with the ignition turned off.
Lift the wiper arms away from the windshield until they are in a vertical position.

2. Remove Old Wiper Blades

Locate the release tab on the wiper blade arm.
Press the release tab and slide the wiper blade downward to detach it from the wiper arm.
Carefully remove the blade from the arm and set it aside.

3. Install New Wiper Blades

Take the new wiper blade and align it with the wiper arm.
Slide the wiper blade onto the arm until you hear a click, indicating it is securely attached.
Ensure the blade is seated properly and aligned with the wiper arm.

4. Lower Wiper Arms

Gently lower the wiper arms back to their original position on the windshield.
Check to ensure they are not touching the windshield when resting.