how to fix P0130 code in Tesla Model S Original (2012-2020)

Learn how to diagnose and fix P0130 oxygen sensor issue in Tesla Model S. Step-by-step guide with diagnostic procedures and repair instructions.

Solution

1. Preparation

• Tools Required: OBD-II scanner, multimeter, socket set, torque wrench.
• Disconnect the battery to ensure safety while working on electrical components.
• Allow the vehicle to cool down if the engine has been running.

2. Remove the Oxygen Sensor

• Locate the oxygen sensor on Bank 1, which is typically found in the exhaust manifold or upstream of the catalytic converter.
• Use a socket wrench to carefully remove the oxygen sensor from its position.
• Disconnect the electrical connector from the oxygen sensor.

3. Inspect and Clean

• Inspect the oxygen sensor for any signs of damage, such as burnt connectors or physical damage to the sensor itself.
• Clean the connector and surrounding area to ensure good electrical contact.

4. Replace the Oxygen Sensor

• If the sensor is damaged, install a new oxygen sensor. Ensure that it is compatible with Tesla Model S specifications.
• Torque the oxygen sensor to the manufacturer’s specification (typically around 30-40 Nm).
• Reconnect the electrical connector securely.

5. Reconnect Battery and Clear Codes

• Reconnect the battery terminals, ensuring a secure connection.
• Use the OBD-II scanner to clear the P0130 code from the vehicle's computer.