FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Tesla/Model S/Plaid/Refresh (2021-present)/how to fix P0130 code in Tesla Model S Original (2012-2020)

how to fix P0130 code in Tesla Model S Original (2012-2020)

Tesla Model S Plaid/Refresh (2021-present)

Error Codes
Severity: mediumDifficulty: mediumError Code: P01301-2 hours
3 min read
442 words

Problem Statement

Learn how to diagnose and fix P0130 oxygen sensor issues in Tesla Model S. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0130
Affected Component
Exhaust System
Estimated Time
1-2 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical systems.
  • ⚠Allow the engine to cool before working near the exhaust system.

Symptoms

  • •Check engine light illuminated
  • •Decreased fuel efficiency
  • •Poor engine performance
  • •Increased emissions
  • •Engine hesitations during acceleration

Diagnostic Steps

  1. 1Scan for error codes using an OBD-II scanner to confirm the P0130 code and check for any additional codes.
  2. 2Inspect the wiring and connectors for the upstream oxygen sensor for any damage or corrosion.
  3. 3Measure the voltage output of the upstream oxygen sensor with a multimeter while the engine is running.
  4. 4Check the oxygen sensor heater circuit for continuity and proper function.
  5. 5Verify the engine's air-fuel mixture and ensure it is within specifications.

Solution

Solution

1. Preparation

  • Gather all necessary tools and parts.
  • Ensure the vehicle is parked on a level surface and the ignition is off.
  • Disconnect the negative terminal of the battery to prevent electrical shorts.

2. Inspect Oxygen Sensor

  • Locate the upstream oxygen sensor on the exhaust manifold or pipe.
  • Disconnect the electrical connector from the oxygen sensor.
  • Check for any signs of corrosion, damage, or loose connections.

3. Replace Oxygen Sensor

  • Using a socket wrench, carefully remove the old oxygen sensor from the exhaust.
  • Apply anti-seize compound to the threads of the new oxygen sensor (if required).
  • Install the new oxygen sensor and torque it to the manufacturer’s specifications (usually around 30 lb-ft).
  • Reconnect the electrical connector securely.

4. Clear Error Codes

  • Reconnect the negative battery terminal.
  • Start the engine and allow it to warm up.
  • Use the OBD-II scanner to clear the P0130 code from the system.

5. Monitor Performance

  • Perform a short test drive to ensure the engine operates smoothly.
  • Recheck for any error codes after the test drive.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Multimeter
  • •Torque wrench
  • •Anti-seize compound

Parts Required

  • •Upstream oxygen sensor (specific to Tesla Model S)

Additional Information

Error Code
P0130
Affected Component
Exhaust System
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
1 item

Related Faults

  1. how can I fix the steering issues in my Tesla Model S Plaid/Refresh (2021-present)?

    Learn how to diagnose and fix steering issues in Tesla Model S Plaid (2021-present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Steering5 symptoms

  2. why does my Tesla Model S Plaid/Refresh (2021-present) hesitate when accelerating

    Learn how to diagnose and fix acceleration hesitation in Tesla Model S Plaid (2021-present). Step-by-step guide with diagnostic procedures and repair instructions.

    Electrical5 symptoms

  3. why does my Tesla Model S Plaid/Refresh (2021-present) shake when I brake

    Learn how to diagnose and fix shaking during braking in Tesla Model S Plaid (2021-present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

    Brakes5 symptoms

  4. my Tesla Model S has a check battery message what does that mean

    Learn how to diagnose and fix the 'Check Battery' message in Tesla Model S. Step-by-step guide with diagnostic procedures and repair instructions.

    Electrical6 symptoms

  5. how to fix transmission slipping in my Tesla Model S Plaid/Refresh (2021-present)

    Learn how to diagnose and fix transmission slipping in Tesla Model S Plaid (2021-present). Step-by-step guide with symptoms, diagnostics, and solutions.

    Transmission5 symptoms

  6. why does my Tesla Model S Plaid/Refresh (2021-present) have a rough idle when cold

    Learn how to diagnose and fix rough idle issues in Tesla Model S Plaid (2021-present). Step-by-step guide with diagnostic procedures and repair instructions.

    Electrical5 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation