how to fix P0011 timing code in Tesla Model S Original (2012-2020)

Learn how to diagnose and fix P0011 camshaft timing issue in Tesla Model S (2012-2020). Step-by-step guide with diagnostic procedures and repair instructions.

Solution

1. Preparation

• Gather necessary tools and parts.
• Disconnect the negative terminal of the battery to ensure safety.
• Allow the engine to cool before starting the repair.

2. Inspect and Replace VVT Solenoid

• Sub-steps:
  1. Remove the engine cover to gain access to the VVT solenoid.
  2. Disconnect the electrical connector from the solenoid.
  3. Remove the mounting bolts securing the solenoid using a socket set.
  4. Carefully pull the solenoid out and inspect the O-ring for damage.
  5. If damaged, replace with a new solenoid and O-ring.
  6. Reinstall the new solenoid and tighten the bolts to the manufacturer's torque specifications (usually around 7-10 Nm).

3. Replace Timing Chain/Belt (if necessary)

• Sub-steps:
  1. Remove any components obstructing access to the timing chain/belt (e.g., covers, pulleys).
  2. Align the camshaft and crankshaft timing marks to ensure they are in the correct position.
  3. Remove the old timing chain/belt, noting the routing for installation.
  4. Install the new timing chain/belt, ensuring it follows the correct path and timing marks align.
  5. Reassemble all components removed for access, ensuring all bolts are torqued correctly.

4. Oil System Check

• Sub-steps:
  1. Drain the engine oil and replace it with high-quality oil as specified by Tesla.
  2. Replace the oil filter to ensure clean oil circulation.
  3. Refill the engine with oil to the proper level and check for leaks.