how to clear fault codes in Tesla Model S Plaid/Refresh (2021-present)

Tesla Model S Plaid/Refresh (2021-present)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

2 min read

377 words

Problem Statement

Learn how to clear fault codes in Tesla Model S Plaid/Refresh (2021-present) with this step-by-step guide. Ensure proper diagnostics and vehicle maintenance.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe and stable position before performing diagnostics.

Symptoms

•Fault codes displayed on the vehicle's dashboard
•Warning lights illuminated on the instrument cluster
•Reduced functionality of certain vehicle features
•Inconsistent performance or operation of systems
•Issues that may recur after initial reset

Diagnostic Steps

1
Ensure the vehicle is in a safe location and parked securely.
2
Power on the vehicle without starting the engine by pressing the brake pedal and pressing the 'Power' button.
3
Navigate to the main touchscreen and access the 'Service' menu.
4
Select 'Diagnostic Tools' and then 'Clear Fault Codes'.
5
Confirm the action when prompted to clear the stored codes.
6
Perform a short test drive to monitor if any warning lights reappear.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for this procedure.

Parts Required

•None required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in a safe location and parked securely.
2
Power on the vehicle without starting the engine by pressing the brake pedal and pressing the 'Power' button.
3
Navigate to the main touchscreen and access the 'Service' menu.
4
Select 'Diagnostic Tools' and then 'Clear Fault Codes'.
5
Confirm the action when prompted to clear the stored codes.
6
Perform a short test drive to monitor if any warning lights reappear.

Solution

1. Preparation

Ensure the vehicle is parked on a flat surface with the parking brake engaged.
Make sure the vehicle is in 'Park' mode.
Tools Required: None specific for this process.

Power on the vehicle by pressing the brake and the 'Power' button.
On the touchscreen, locate and tap on the 'Service' icon on the bottom menu bar.
Navigate to the 'Diagnostic Tools' section.

3. Clearing the Fault Codes

In the 'Diagnostic Tools' menu, find and select the 'Clear Fault Codes' option.
Follow the on-screen prompts to confirm the clearing of the codes.
Wait for the system to process the request.

4. Verification

Check the instrument cluster for any remaining warning lights.
Perform a short drive to ensure no new fault codes appear.
Recheck the 'Diagnostic Tools' menu to confirm that fault codes have been successfully cleared.