FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to clean the rear camera on Tesla Model S Original (2012-2020) - Tesla Model S
Home/Cars/Tesla/Model S/Plaid/Refresh (2021-present)/how to clean the rear camera on Tesla Model S Original (2012-2020)

how to clean the rear camera on Tesla Model S Original (2012-2020)

Tesla Model S Plaid/Refresh (2021-present)

Error Codes
15-30 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
377 words

Problem Statement

Learn how to clean the rear camera on Tesla Model S (2012-2020) for improved visibility. Step-by-step instructions and necessary tools included.

Affected Component
Body/Interior
Estimated Time
15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' mode before cleaning the camera to prevent unexpected movements.

Symptoms

  • •Blurry or unclear rear camera image
  • •Image distortion or artifacts in video feed
  • •Increased difficulty in parking or reverse maneuvers
  • •Occasional error messages related to the rear camera

Diagnostic Steps

  1. 1
  2. 2
  3. 3

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Microfiber cloth
  • •Glass cleaner
  • •Isopropyl alcohol

Parts Required

  • •None

Additional Information

Affected Component
Body/Interior
Estimated Time
15-30 minutes
Difficulty
easy
Severity
low
Tools Required
3 items
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and materials.
  • Ensure the vehicle is parked on a flat surface and turned off.
  • Allow the camera to cool if the vehicle has been in operation.
2. Gather Materials
  • Use a microfiber cloth.
  • Obtain a gentle glass cleaner or a mixture of water and isopropyl alcohol (50/50 ratio).
3. Clean the Camera Lens
  1. Dampen the Cloth: Lightly spray the microfiber cloth with the glass cleaner or the water-alcohol mixture. Do not spray directly onto the camera.
  2. Wipe the Lens: Gently wipe the camera lens in a circular motion to remove dirt and smudges. Avoid using excessive pressure to prevent scratching.
  3. Dry the Lens: Use a dry section of the microfiber cloth to remove any remaining moisture, ensuring the lens is clear and streak-free.
4. Recheck Camera Functionality
  • Turn on the vehicle and engage the rear camera to check for improved image quality.