how to change the wiper blades on Tesla Model S Original (2012-2020)

Tesla Model S Plaid/Refresh (2021-present)

Error Codes

15-30 minutes

Time

easy

Difficulty

low

Severity

2 min read

384 words

Problem Statement

Learn how to change wiper blades on Tesla Model S (2012-2020). Step-by-step instructions for effective wiper maintenance and improved visibility.

Affected Component

Body/Interior

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the wiper arms are lifted and secured before attempting to remove or install blades to avoid injury or damage.

Symptoms

•Streaking on the windshield during operation
•Wipers skipping or chattering across the glass
•Worn rubber edges on the wiper blades
•Reduced visibility due to inadequate clearing of rain or debris
•Noise during wiper operation

Diagnostic Steps

1
Inspect wiper blades for visible signs of wear, damage, or deterioration.
2
Test wiper function to confirm ineffective clearing of the windshield.
3
Check if the wiper arm is securely attached and not bent or damaged.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ensure the vehicle is parked on a level surface and the ignition is turned off.
•Lift the wiper arms away from the windshield into a vertical position.

Parts Required

•New wiper blades (specific to Tesla Model S)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required: None specific for this procedure.
Ensure the vehicle is parked on a level surface and the ignition is turned off.
Lift the wiper arms away from the windshield into a vertical position.

2. Remove Old Wiper Blades

Locate the release tab on the wiper blade where it connects to the wiper arm.
Press the release tab to unlock the blade from the arm.
Slide the wiper blade downwards off the wiper arm and remove it completely.

3. Install New Wiper Blades

Take the new wiper blade and align it with the wiper arm.
Slide the wiper blade onto the arm until it clicks into place, ensuring the release tab locks securely.
Gently lower the wiper arm back onto the windshield.

4. Test Wiper Function

Turn on the vehicle’s ignition.
Activate the wipers to ensure they function correctly and make full contact with the windshield.