why does my Tesla Model 3 Highland (2024-present) make a screeching noise when I brake?

Tesla Model 3 Highland (2024-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

402 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix screeching noise during braking in Tesla Model 3 Highland (2024-present). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on the braking system.
•Allow brake components to cool before handling.

Symptoms

•Screeching noise when applying brakes
•Reduced braking efficiency
•Vibration or pulsation in the brake pedal
•Brake warning light illuminated on the dashboard
•Unusual wear on brake pads or rotors

Diagnostic Steps

1
Inspect the brake pads for wear and tear.
2
Check brake rotor condition for scoring or warping.
3
Look for debris or contaminants on the braking surfaces.
4
Test the brake fluid level and condition.
5
Scan for any error codes related to the braking system using an OBD-II scanner.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Micrometer
•Brake cleaner
•Brake grease

Parts Required

•Brake pads
•Brake rotors (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather tools and materials.
Park the vehicle on a level surface and engage the parking brake.
Wear safety glasses and gloves for protection.

2. Inspect Brake Pads

Sub-steps:
- Remove the wheel using a socket set.
- Visually inspect the brake pads for thickness; they should be at least 3mm.
- If worn, proceed to replace the brake pads.

3. Inspect Brake Rotors

Sub-steps:
- Check the rotors for any visible cracks or grooves.
- Use a micrometer to measure rotor thickness; ensure it meets manufacturer specifications.
- If damaged, replace the rotors.

4. Clean and Lubricate Components

Sub-steps:
- Clean the brake calipers and any debris using brake cleaner.
- Apply brake grease to the back of the brake pads and moving parts of the caliper.

5. Reassemble and Test

Sub-steps:
- Reinstall the brake components and wheel.
- Lower the vehicle and perform a brake test to ensure the noise is resolved.