how to reset the Tesla Model 3 Original (2017-2023) traction control system

Tesla Model 3 Highland (2024-present)

Error Codes

30 minutes

Time

medium

Difficulty

medium

Severity

3 min read

441 words

Problem Statement

Learn how to reset the traction control system in Tesla Model 3 (2017-2023). Step-by-step guide with symptoms, diagnostic steps, and safety tips.

Affected Component

Electrical

Estimated Time

30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and parked before performing any resets.

Symptoms

•Traction control warning light illuminated on the dashboard
•Reduced traction control functionality
•Error messages related to traction control displayed on the screen
•Unusual handling or increased wheel spin during acceleration
•Lack of stability in slippery conditions

Diagnostic Steps

1
Check for any active error messages using the vehicle's touchscreen.
2
Inspect the vehicle for any physical damage to wheels or suspension components.
3
Verify that all software updates have been installed.
4
Ensure that tire pressure is at the manufacturer's recommended levels.
5
Examine the brake system for any issues that may affect traction control.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•No special tools required for resetting the traction control system.

Parts Required

•No replacement parts required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check for any active error messages using the vehicle's touchscreen.
2
Inspect the vehicle for any physical damage to wheels or suspension components.
3
Verify that all software updates have been installed.
4
Ensure that tire pressure is at the manufacturer's recommended levels.
5
Examine the brake system for any issues that may affect traction control.

Solution

1. Preparation

Ensure the vehicle is parked on a flat surface.
Shift the vehicle into "Park."
Make sure the vehicle's battery is charged sufficiently.

2. Reset the Vehicle's Systems

Power Cycle the Vehicle
- Press and hold the brake pedal.
- Use the touchscreen to navigate to "Controls."
- Select "Safety & Security."
- Choose "Power Off."
- Wait for at least 2 minutes without interacting with the vehicle.
- Press the brake pedal again to power the vehicle back on.

3. Reset Traction Control via Touchscreen

Access the Traction Control Settings
- On the main screen, go to "Controls."
- Navigate to "Driving."
- Locate the "Traction Control" section.
- Toggle the setting off, wait a few seconds, and toggle it back on.

4. Verify Traction Control Functionality

Drive the vehicle at a low speed in a controlled environment to test the traction control system's response.