how to reset the Tesla Model 3 Original (2017-2023) traction control light

Tesla Model 3 Highland (2024-present)

Error Codes

0.5 hours

Time

easy

Difficulty

medium

Severity

3 min read

422 words

Problem Statement

Learn how to reset the traction control light on your Tesla Model 3 (2017-2023). Step-by-step guide with diagnostic procedures and solutions.

Affected Component

Electrical

Estimated Time

0.5 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and secure before performing any resets or checks.

Symptoms

•Traction control warning light illuminated on the dashboard
•Reduced traction or stability during acceleration
•Vehicle may enter a reduced power mode
•Unresponsive traction control system when attempting to engage/disengage
•Possible alerts or messages on the touchscreen regarding traction control

Diagnostic Steps

1
Check for any error messages on the touchscreen related to the traction control system.
2
Ensure that the vehicle is in a safe, flat area and that all wheels are properly aligned.
3
Perform a system reboot by holding down the two scroll wheels on the steering wheel until the screen resets.
4
Verify if the traction control light is still illuminated after the reboot.
5
If the light persists, use the Tesla app or onboard diagnostics to check for specific error codes.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Procedure:**
•Press and hold both scroll wheels on the steering wheel.
•Maintain pressure until the central touchscreen goes black and the Tesla logo appears.
•Release the scroll wheels once the logo is displayed.

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Symptoms

•Traction control warning light illuminated on the dashboard

•Reduced traction or stability during acceleration

•Vehicle may enter a reduced power mode

•Unresponsive traction control system when attempting to engage/disengage

•Possible alerts or messages on the touchscreen regarding traction control

Diagnostic Steps

1
Check for any error messages on the touchscreen related to the traction control system.
2
Ensure that the vehicle is in a safe, flat area and that all wheels are properly aligned.
3
Perform a system reboot by holding down the two scroll wheels on the steering wheel until the screen resets.
4
Verify if the traction control light is still illuminated after the reboot.
5
If the light persists, use the Tesla app or onboard diagnostics to check for specific error codes.

Solution

1. Preparation

Ensure the vehicle is on a flat surface and parked safely.
Confirm that all doors are closed and that the vehicle is in 'Park' mode.

2. Perform a System Reboot

Tools Required: None
Procedure:
1. Press and hold both scroll wheels on the steering wheel.
2. Maintain pressure until the central touchscreen goes black and the Tesla logo appears.
3. Release the scroll wheels once the logo is displayed.

3. Check Traction Control Settings

Tools Required: None
Procedure:
1. Access the main menu on the touchscreen.
2. Navigate to 'Controls'.
3. Select 'Driving', then find the 'Traction Control' option.
4. Toggle traction control off and then back on to reset the system.

4. Test Drive

Tools Required: None
Procedure:
1. Take the vehicle for a short drive to test the traction control functionality.
2. Monitor the dashboard for the traction control light status.