how to reset the Tesla Model 3 Original (2017-2023) service message

Tesla Model 3 Highland (2024-present)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

414 words

Problem Statement

Learn how to reset the service message on Tesla Model 3 (2017-2023). Step-by-step instructions to clear notifications and restore functionality.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and in 'Park' mode before performing the reset to prevent unintended movement.

Symptoms

•Service message displayed on the instrument cluster
•Notifications indicating required service or maintenance
•Possible reduced functionality of certain features due to service message
•Interference with driver information display
•No other mechanical issues present

Diagnostic Steps

1
Verify that the service message is not indicative of a critical issue by checking the owner's manual.
2
Ensure the vehicle is in the 'Park' position and the ignition is off.
3
Access the vehicle's touchscreen to determine the specific service message details.
4
Check for any pending software updates that may need to be completed first.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle's touchscreen
•Key fob or mobile app

Parts Required

•None necessary for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Verify that the service message is not indicative of a critical issue by checking the owner's manual.
2
Ensure the vehicle is in the 'Park' position and the ignition is off.
3
Access the vehicle's touchscreen to determine the specific service message details.
4
Check for any pending software updates that may need to be completed first.

Solution

1. Preparation

Ensure the vehicle is parked on a flat surface and powered on.
Have the vehicle's key fob or mobile app ready for access.

2. Resetting the Service Message

Access the Touchscreen:
- Tap on the "Controls" icon located at the bottom of the touchscreen.
Navigate to Service Menu:
- Select "Service" from the menu options.
Perform the Reset:
- Look for the option to reset or clear service messages. This may be labeled as "Clear Service Alert" or similar.
- Confirm the action when prompted to proceed with resetting the service message.
Restart the Vehicle:
- To complete the reset, it is advisable to perform a soft reset of the vehicle.
- Hold down both scroll wheels on the steering wheel until the touchscreen turns off and then back on.

3. Final Checks

After the vehicle restarts, check the instrument cluster for the absence of the service message.