how to reset the range display on my Tesla Model 3 Highland (2024-present)

Tesla Model 3 Highland (2024-present)

Error Codes

10-15 minutes

Time

easy

Difficulty

medium

Severity

3 min read

471 words

Problem Statement

Learn how to reset the range display in your Tesla Model 3 Highland (2024-present). Step-by-step guide to fix incorrect range estimates and display issues.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location and in 'Park' mode before performing any resets.

Symptoms

•Range display shows incorrect mileage.
•Range estimate fluctuates significantly.
•Range display does not update after charging.
•Inaccurate battery percentage reading.
•Range display is frozen or unresponsive.

Diagnostic Steps

1
Check the current range displayed on the dashboard.
2
Ensure the vehicle is fully charged to eliminate low battery influence.
3
Verify that the software is up to date through the vehicle settings.
4
Restart the vehicle by holding the two scroll buttons on the steering wheel until the screen resets.
5
Confirm if other displays (like speed and battery percentage) are functioning correctly.
6
Inspect for any software notifications or alerts on the display.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required for this procedure.

Parts Required

•None specifically required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the current range displayed on the dashboard.
2
Ensure the vehicle is fully charged to eliminate low battery influence.
3
Verify that the software is up to date through the vehicle settings.
4
Restart the vehicle by holding the two scroll buttons on the steering wheel until the screen resets.
5
Confirm if other displays (like speed and battery percentage) are functioning correctly.
6
Inspect for any software notifications or alerts on the display.

Solution

1. Preparation

Ensure the vehicle is parked in a safe location.
Confirm the vehicle is in "Park" mode.
Make sure that the vehicle's software is up to date.

2. Reset the Range Display

Access the Settings Menu:
- On the touchscreen, tap on the “Controls” icon at the bottom of the screen.
- Navigate to “Settings” and then to “Display.”
Reset the Display:
- Within the Display settings, look for the option labeled “Reset Range Display.”
- Tap on this option to reset the range display.
Confirm the Reset:
- A prompt may appear asking you to confirm the reset. Select “Yes” to proceed.
- Wait for the system to process the reset, which may take a few moments.
Check the Range After Reset:
- Once the reset is complete, observe the range display to see if it reflects more accurate information.

3. Restart the Vehicle (if necessary)

If the range display does not update:
1. Press and hold the two scroll buttons on the steering wheel simultaneously.
2. Wait for the screen to turn off and then turn back on.
3. Check the range display again after the reboot.