how to replace the windshield wipers on my Tesla Model 3 Original (2017-2023)

Tesla Model 3 Highland (2024-present)

Error Codes

30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

419 words

Problem Statement

Step-by-step guide to replace windshield wipers on Tesla Model 3 (2017-2023). Learn symptoms, diagnostic steps, and tools required for a successful repair.

Affected Component

Body/Interior

Estimated Time

30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is powered off before attempting to replace wipers to avoid accidental activation.

Symptoms

•Streaking or smearing on the windshield
•Wipers skipping or not making full contact with the glass
•Noisy operation when wipers are in use
•Wipers not functioning at all

Diagnostic Steps

1
Inspect wiper blades for visible wear or damage.
2
Test wiper operation to confirm functionality.
3
Check wiper arms for proper attachment and tension.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Clean cloths
•Small flat-head screwdriver (optional)

Parts Required

•New windshield wiper blades (specific to the Tesla Model 3)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required: Clean cloths, a small flat-head screwdriver (optional for stubborn clips).
Park the vehicle on a level surface and turn off the car.
Ensure the windshield is clean to avoid scratching during replacement.

2. Lift Wiper Arm

Gently pull the wiper arm away from the windshield until it is in a vertical position.
Ensure the arm is stable to prevent it from snapping back against the glass.

3. Remove Old Wiper Blade

Locate the release tab on the wiper blade (this is typically a small button or clip on the underside).
Press the release tab while sliding the wiper blade off the arm.
If necessary, use a flat-head screwdriver to gently pry the blade off if it is stuck.

4. Install New Wiper Blade

Align the new wiper blade with the wiper arm.
Slide the new blade onto the arm until you hear a click, indicating it is securely locked in place.
Ensure the blade is oriented correctly, with the rubber edge facing the windshield.

5. Lower Wiper Arm

Carefully lower the wiper arm back onto the windshield.
Repeat the process for the other wiper blade if necessary.