how to replace the windshield wipers on my Tesla Model 3 Highland (2024-present)

Tesla Model 3 Highland (2024-present)

Error Codes

30 minutes

Time

easy

Difficulty

medium

Severity

2 min read

366 words

Problem Statement

Step-by-step guide to replace windshield wipers on Tesla Model 3 Highland (2024-present). Learn symptoms, diagnostic steps, and installation tips.

Affected Component

Body/Interior

Estimated Time

30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is off and parked before beginning the replacement process.

Symptoms

•Streaking on the windshield during use
•Wipers skipping across the glass
•Noisy operation of wipers
•Wipers not making proper contact with the windshield
•Worn rubber blades visible upon inspection

Diagnostic Steps

1
Inspect the wiper blades visually for signs of wear or damage.
2
Test the wipers in various settings to confirm operational issues.
3
Check for proper alignment and attachment of the wiper arms.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ensure the vehicle is parked on a level surface with the ignition off.
•Lift the wiper arms away from the windshield into the service position.

Parts Required

•New wiper blades compatible with Tesla Model 3 Highland (2024-present)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required: None specifically needed for this task.
Ensure the vehicle is parked on a level surface with the ignition off.
Lift the wiper arms away from the windshield into the service position.

2. Remove Old Wiper Blades

Locate the release tab on the wiper blade arm.
Press the release tab while sliding the wiper blade downwards to detach it from the arm.
Pull the blade completely off the arm and set it aside.

3. Install New Wiper Blades

Align the new wiper blade’s attachment slot with the wiper arm’s hook.
Slide the blade onto the arm until you hear a click indicating it is securely attached.
Gently lower the wiper arm back to the windshield.

4. Test New Wiper Blades

Turn on the ignition.
Activate the wiper function to ensure proper operation.
Check for smooth motion and clear vision without streaks.