how to clear the alerts on my Tesla Model 3 Highland (2024-present) dashboard

Tesla Model 3 Highland (2024-present)

Error Codes

15-30 minutes

Time

medium

Difficulty

medium

Severity

3 min read

402 words

Problem Statement

Learn how to clear dashboard alerts on your Tesla Model 3 Highland (2024-present). Step-by-step guide to resolve notifications and ensure vehicle performance.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary while performing resets and clearing alerts.

Symptoms

•Dashboard alerts illuminated
•Notifications displayed on touchscreen
•System warnings affecting vehicle operation
•Reduced performance or features due to warnings
•Possible restrictions in driving modes or functions

Diagnostic Steps

1
Check the touchscreen for specific alerts and messages.
2
Access the vehicle's settings menu to review alert history.
3
Identify the source of the alerts (e.g., maintenance required, tire pressure warning).
4
Ensure the vehicle is in a safe state to perform any necessary resets.
5
Verify that all vehicle systems are functioning normally before clearing alerts.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically needed for clearing alerts.

Parts Required

•None required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the touchscreen for specific alerts and messages.
2
Access the vehicle's settings menu to review alert history.
3
Identify the source of the alerts (e.g., maintenance required, tire pressure warning).
4
Ensure the vehicle is in a safe state to perform any necessary resets.
5
Verify that all vehicle systems are functioning normally before clearing alerts.

Solution

1. Preparation

Ensure the vehicle is parked in a safe location.
Confirm that the vehicle is powered on.
Keep the touchscreen clean for optimal visibility.

2. Access the Alerts

Tap on the warning icon on the dashboard or touchscreen.
Review the details of each alert to understand the issues.

3. Clear Alerts

If the alert is related to a temporary condition (e.g., low tire pressure), resolve the issue first (e.g., inflate tires).
For persistent alerts, navigate to:
- Controls > Service > Clear Alerts
Follow the prompts to clear the alerts from the dashboard.

4. Reset the System (if needed)

If alerts remain after clearing, perform a soft reset:
- Press and hold both scroll wheels on the steering wheel until the touchscreen resets.
Wait for the system to reboot and check if alerts have been cleared.

5. Monitor for Recurrence

After clearing alerts, monitor the dashboard for any reappearance of warnings.
If alerts return, investigate the underlying issues as indicated in the alert details.