why is my Tesla Outback 6th Generation (2020-2024) making a loud noise when turning

Subaru Outback 6th Generation (2020-2024)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

524 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix loud noise when turning in Tesla Outback 6th Generation. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Steering

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Ensure the vehicle is securely supported on jack stands before working underneath.

Symptoms

•Loud grinding or clunking noise when turning the steering wheel
•Difficulty in steering or a feeling of looseness in the steering
•Vibrations through the steering wheel while turning
•Uneven tire wear
•Possible warning lights related to power steering or traction control

Diagnostic Steps

1
Inspect the power steering fluid level and condition, looking for any leaks.
2
Check for any visible wear or damage to the CV joints and axles.
3
Examine the suspension components, including struts and control arms, for signs of wear or damage.
4
Use an OBD-II scanner to check for any error codes related to the steering or suspension systems.
5
Test drive the vehicle to replicate the noise and determine under what conditions it occurs.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Jack and jack stands
•Screwdriver set

Parts Required

•Power steering fluid
•CV joint/axle assembly (if needed)
•Suspension components (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the power steering fluid level and condition, looking for any leaks.
2
Check for any visible wear or damage to the CV joints and axles.
3
Examine the suspension components, including struts and control arms, for signs of wear or damage.
4
Use an OBD-II scanner to check for any error codes related to the steering or suspension systems.
5
Test drive the vehicle to replicate the noise and determine under what conditions it occurs.

Solution

1. Preparation

Gather all necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the battery to ensure safety while working on electrical components.

2. Inspect Power Steering System

Sub-step 1: Remove the power steering fluid reservoir cap and check the fluid level.
Sub-step 2: If low, top off with manufacturer-recommended power steering fluid.
Sub-step 3: Inspect hoses for leaks and replace any damaged hoses.

3. Check CV Joints and Axles

Sub-step 1: Raise the front of the vehicle using a jack and secure it with jack stands.
Sub-step 2: Visually inspect the CV joints for cracks or tears in the rubber boots.
Sub-step 3: If damage is present, replace the CV joint or axle assembly as necessary.

4. Examine Suspension Components

Sub-step 1: Inspect struts, control arms, and bushings for wear or damage.
Sub-step 2: If components are worn, replace them with OEM parts.
Sub-step 3: Ensure all bolts are properly torqued to manufacturer specifications.

5. Clear Codes and Test Drive

Sub-step 1: Reconnect the battery and use the OBD-II scanner to clear any codes.
Sub-step 2: Conduct a test drive to ensure the noise is resolved.