why does my Tesla Outback 6th Generation (2020-2024) make a clicking sound when accelerating

Subaru Outback 6th Generation (2020-2024)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

538 words

Problem Statement

Diagnose and fix the clicking sound during acceleration in Tesla Outback (2020-2024). Step-by-step guide with diagnostic and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Ensure the vehicle is securely lifted and supported before working underneath.

Symptoms

•Clicking noise that becomes more pronounced during acceleration
•Possible vibrations felt through the floor or steering wheel
•Decreased performance or power delivery
•Unusual behavior in steering (e.g., pulling to one side)
•Check for any warning lights on the dashboard

Diagnostic Steps

1
Scan for error codes using OBD-II scanner to identify any logged issues related to drivetrain or suspension.
2
Inspect the wheels and tires for any signs of damage, uneven wear, or foreign objects lodged in the tread.
3
Check the CV joints and axles for signs of wear or damage, as these are common sources of clicking noises.
4
Examine the suspension components (e.g., struts, bushings, control arms) for any play, wear, or damage.
5
Lift the vehicle and manually spin the wheels to listen for clicking sounds while inspecting the braking components.
6
Test drive the vehicle to replicate the sound while observing the behavior during different speeds and turns.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Pry bar

Parts Required

•CV joint (if damaged)
•Suspension components (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using OBD-II scanner to identify any logged issues related to drivetrain or suspension.
2
Inspect the wheels and tires for any signs of damage, uneven wear, or foreign objects lodged in the tread.
3
Check the CV joints and axles for signs of wear or damage, as these are common sources of clicking noises.
4
Examine the suspension components (e.g., struts, bushings, control arms) for any play, wear, or damage.
5
Lift the vehicle and manually spin the wheels to listen for clicking sounds while inspecting the braking components.
6
Test drive the vehicle to replicate the sound while observing the behavior during different speeds and turns.

Solution

1. Preparation

Gather necessary tools and safety equipment.
Park the vehicle on a flat surface and engage the parking brake.
Disconnect the battery to ensure safety while working on electrical components.

2. Inspect and Repair CV Joints

Sub-step 1: Remove the wheel on the affected side using a socket set.
Sub-step 2: Inspect the CV joint boots for cracks or leaks; if damaged, replace the CV joint.
Sub-step 3: If the CV joint is intact, check the axle for any play or signs of wear.
Tools Required: Socket set, pry bar, torque wrench.

3. Examine Suspension Components

Sub-step 1: Check all suspension components for wear, paying particular attention to bushings and joints.
Sub-step 2: Replace any worn or damaged suspension parts, such as control arms or struts.
Sub-step 3: Reassemble the suspension and wheel, ensuring all bolts are torqued to the manufacturer’s specifications.
Tools Required: Torque wrench, socket set.

4. Reassemble and Test

Sub-step 1: Reattach the wheel and lower the vehicle to the ground.
Sub-step 2: Reconnect the battery.
Sub-step 3: Perform a test drive to ensure the clicking sound is resolved and verify proper vehicle handling.
Tools Required: None specific for this step.