FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Tesla Outback won’t start and just clicks what should I do - Subaru Outback
Home/Cars/Subaru/Outback/6th Generation (2020-2024)/my Tesla Outback won’t start and just clicks what should I do

my Tesla Outback won’t start and just clicks what should I do

Subaru Outback 6th Generation (2020-2024)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
441 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix a no-start condition in Tesla Outback. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Electrical
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems to avoid shocks and shorts.

Symptoms

  • •Clicking noise when the ignition is turned on
  • •Possible dimming of dashboard lights
  • •No engine turnover or cranking
  • •Battery warning light may be illuminated
  • •Electrical accessories may function intermittently

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Socket set
  • •OBD-II scanner
  • •Jumper cables

Parts Required

  • •New battery (if necessary)
  • •New starter motor (if necessary)

Additional Information

Affected Component
Electrical
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
4 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Tools Required: Multimeter, socket set, OBD-II scanner, jumper cables.
  • Disconnect the negative battery terminal to prevent any electrical shorts while working.
2. Battery Inspection
  • Sub-steps:
    1. Remove the battery cover if applicable.
    2. Clean the terminals using a wire brush to remove any corrosion.
    3. Tighten any loose connections.
    4. If the battery voltage is low, charge it or replace it with a new battery.
3. Starter Motor Check
  • Sub-steps:
    1. Locate the starter motor (typically near the engine block).
    2. Disconnect the wiring harness from the starter.
    3. Using jumper cables, connect the battery directly to the starter terminal to see if it engages.
    4. If the starter engages, the issue may be with the ignition switch or relay.
4. Replace Faulty Components
  • Sub-steps:
    1. If the starter motor is faulty, remove it from the engine using the socket set (note the mounting bolts' torque specifications).
    2. Install the new starter motor and connect all wiring securely.
    3. Reconnect the battery terminals.
5. Final Assembly
  • Reinstall any covers or components removed during the process.
  • Reconnect the negative battery terminal last.