how to reset the warning lights on Tesla Outback 6th Generation (2020-2024)

Subaru Outback 6th Generation (2020-2024)

Error Codes

15-30 minutes

Time

medium

Difficulty

medium

Severity

3 min read

404 words

Problem Statement

Learn how to reset warning lights on Tesla Outback 6th Generation (2020-2024). Step-by-step guide with diagnostic procedures and reset instructions.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely parked before performing any resets or maintenance

Symptoms

•Warning lights illuminated on the dashboard
•Check Engine light illuminated
•Battery warning light active
•Safety system warnings displayed
•Maintenance required light on

Diagnostic Steps

1
Verify that the issue causing the warning light has been resolved (e.g., check fluid levels, inspect for repairs)
2
Ensure the vehicle is in 'Park' mode and the ignition is turned on without starting the engine
3
Use the touchscreen to access the vehicle settings menu
4
Check for any specific error codes using the vehicle's diagnostic tool, if available
5
Confirm that all doors are closed securely and there are no open recalls

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner

Parts Required

•None specifically for resetting warning lights.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Verify that the issue causing the warning light has been resolved (e.g., check fluid levels, inspect for repairs)
2
Ensure the vehicle is in 'Park' mode and the ignition is turned on without starting the engine
3
Use the touchscreen to access the vehicle settings menu
4
Check for any specific error codes using the vehicle's diagnostic tool, if available
5
Confirm that all doors are closed securely and there are no open recalls

Solution

1. Preparation

Ensure the vehicle is parked on a level surface and is in "Park" mode.
Gather necessary tools, if needed, such as a diagnostic tool or OBD-II scanner.

Turn on the vehicle by pressing the brake pedal and the start button.
On the touchscreen, tap on the "Controls" icon at the bottom of the screen.

3. Navigate to Warning Lights Reset

From the Controls menu, go to the "Service" section.
Look for "Warning Lights" or "Reset Warnings" option in the service settings.

4. Perform the Reset

Select the warning lights you wish to reset.
Follow on-screen prompts to confirm the reset action.

5. Finalize

After completing the reset, turn off the vehicle, wait a few seconds, and then restart it.
Verify that the warning lights are no longer illuminated on the dashboard.