how to reset the oil change light in Tesla Outback 6th Generation (2020-2024)

Subaru Outback 6th Generation (2020-2024)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

349 words

Problem Statement

Learn how to reset the oil change light in the Tesla Outback 6th Generation (2020-2024) with this step-by-step guide. Quick and easy instructions.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location while performing the reset.

Symptoms

•Oil change indicator light remains illuminated on the dashboard
•Notifications for oil change service reminders
•No change in oil level or quality after servicing

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the engine is off.
2
Turn on the vehicle's power without starting the engine (accessory mode).
3
Navigate to the vehicle settings or service menu on the touchscreen display.
4
Locate the 'Oil Change' or 'Service' section in the menu.
5
Select the option to reset or clear the oil change light.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Touchscreen interface

Parts Required

•None required for the reset process

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the engine is off.
2
Turn on the vehicle's power without starting the engine (accessory mode).
3
Navigate to the vehicle settings or service menu on the touchscreen display.
4
Locate the 'Oil Change' or 'Service' section in the menu.
5
Select the option to reset or clear the oil change light.

Solution

1. Preparation

Gather necessary tools for accessing the touchscreen.
Ensure the vehicle is in accessory mode.

2. Access the Touchscreen

Turn on the vehicle and wait for the touchscreen to boot up.
Press the gear icon (settings) on the lower corner of the display.

Scroll through the settings until you find the "Service" or "Maintenance" section.
Tap on it to open the service options.

4. Reset Oil Change Light

Look for the "Reset Oil Change Light" option.
Confirm the selection when prompted to ensure the reset is completed.

5. Verify Reset

Turn off the vehicle and then turn it back on.
Check if the oil change light has been successfully reset.