how to fix the wind noise coming from the windows in my Tesla Outback

Subaru Outback 6th Generation (2020-2024)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

465 words

Problem Statement

Learn how to fix wind noise from windows in Tesla Outback. Step-by-step guide with diagnostic steps, tools required, and repair instructions.

Affected Component

Body/Interior

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is turned off and parked safely before performing any repairs.

Symptoms

•Noticeable wind noise at higher speeds
•Whistling sound when driving
•Air leakage around window edges
•Windows not sealing tightly when closed
•Increased cabin noise compared to normal

Diagnostic Steps

1
Inspect the window seals for any visible damage or wear.
2
Check the alignment of the windows to ensure they close properly.
3
Test the windows by manually pressing on them to see if they fit snugly against the seals.
4
Examine the weather stripping for any signs of deterioration or detachment.
5
Perform a water test by spraying water around the window area to check for leaks.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Soft cloth
•Cleaning solution
•Utility knife
•Screwdriver

Parts Required

•New weather stripping (specific to Tesla Outback model)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the window seals for any visible damage or wear.
2
Check the alignment of the windows to ensure they close properly.
3
Test the windows by manually pressing on them to see if they fit snugly against the seals.
4
Examine the weather stripping for any signs of deterioration or detachment.
5
Perform a water test by spraying water around the window area to check for leaks.

Solution

1. Preparation

Gather tools and parts necessary for the repair.
Ensure the vehicle is parked on a level surface and the ignition is off.

2. Inspect and Clean

Sub-steps:
- Use a soft cloth to clean the window edges and surrounding areas.
- Inspect the seals and weather stripping for cracks or tears.
Tools Required: Soft cloth, cleaning solution

3. Replace Weather Stripping

Sub-steps:
- Carefully remove the old weather stripping by peeling it off the window frame.
- Clean the surface where the new weather stripping will be applied.
- Cut the new weather stripping to the appropriate length and press it firmly into place.
Tools Required: Utility knife
Parts Required: New weather stripping (specific to Tesla Outback model)

4. Adjust Window Alignment

Sub-steps:
- Open the window slightly and locate the adjustment screws on the window regulator.
- Use a screwdriver to adjust the window position for a better fit against the weather stripping.
- Close the window to check the seal and repeat adjustments if necessary.
Tools Required: Screwdriver

5. Test and Finalize

Sub-steps:
- Close the windows and take the vehicle for a test drive to assess the noise level.
- Make any further adjustments as necessary based on the noise present.
Tools Required: None