how to fix the transmission fluid leak in Tesla Outback 6th Generation (2020-2024)

Solution

1. Preparation

• Gather tools and parts required for the repair.
• Park the vehicle on a level surface and engage the parking brake.
• Allow the transmission to cool if recently operated.
• Disconnect the vehicle’s battery for safety.

2. Identify and Remove the Source of the Leak

• Transmission Pan:

  • If the pan is damaged, remove it by:
    • Loosening the retaining bolts with a socket set.
    • Carefully prying it off with a flat head screwdriver if necessary.
  • Clean the mating surfaces with a gasket scraper.
  • Install a new gasket or sealant as per manufacturer specifications.
  • Reattach the transmission pan and torque bolts to the specified value (typically 10-15 ft-lbs, check manual).

• Cooler Lines:

  • If the cooler lines are damaged, remove them by:
    • Loosening the clamps with pliers or a socket wrench.
    • Pulling the lines out carefully.
  • Install new lines and secure them with clamps.

3. Fill Transmission Fluid

• Locate the transmission fill port.
• Using a funnel, refill the transmission with the correct type of fluid as specified in the owner's manual (usually ATF or a specific Tesla fluid).
• Check the fluid level with the dipstick or fill plug again.

4. Reassemble and Test

• Reconnect the battery.
• Start the vehicle and allow it to reach operating temperature.
• Shift through all gears to circulate the fluid and check for leaks.
• Inspect again for any signs of fluid leakage.