how to fix the rear view camera not displaying on my Tesla Outback 6th Generation

Subaru Outback 6th Generation (2020-2024)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

508 words

Problem Statement

Learn how to diagnose and fix the rear view camera not displaying on your Tesla Outback 6th Generation. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components to avoid shorts or injuries.

Symptoms

•Rear view camera feed is blank or dark
•Infotainment screen shows an error message related to the camera
•Camera activation delayed or inconsistent
•No image appears when shifting into reverse
•Occasional flickering of the camera feed

Diagnostic Steps

1
Check the vehicle’s settings for any camera-related options and ensure the rear view camera is enabled.
2
Scan the vehicle’s computer system using an OBD-II scanner for error codes related to the camera system.
3
Inspect the rear view camera for physical damage or obstructions (e.g., dirt, ice).
4
Verify the wiring harness and connections to the rear view camera for any signs of wear or disconnection.
5
Test the camera voltage using a multimeter to ensure it is receiving power when the vehicle is in reverse.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Basic hand tools (screwdrivers, wrenches)

Parts Required

•Replacement rear view camera (if necessary)
•Fuses (if blown)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the vehicle’s settings for any camera-related options and ensure the rear view camera is enabled.
2
Scan the vehicle’s computer system using an OBD-II scanner for error codes related to the camera system.
3
Inspect the rear view camera for physical damage or obstructions (e.g., dirt, ice).
4
Verify the wiring harness and connections to the rear view camera for any signs of wear or disconnection.
5
Test the camera voltage using a multimeter to ensure it is receiving power when the vehicle is in reverse.

Solution

1. Preparation

Tools Required: OBD-II scanner, multimeter, basic hand tools (screwdrivers, wrenches).
Disconnect the vehicle's battery to prevent electrical shorts during repairs.

2. Inspect and Clean Camera

Locate the rear view camera, typically mounted near the trunk or on the rear hatch.
Use a cloth and cleaning solution to gently clean the camera lens and remove any obstructions.
Ensure the camera housing is secure and free from debris.

3. Check Electrical Connections

Remove the rear trim panel if necessary to access the camera wiring.
Visually inspect the wiring harness for fraying, corrosion, or disconnections.
Reconnect any loose or corroded connectors and ensure they are secure.

4. Test Camera Voltage

With the battery reconnected, put the vehicle in reverse and use a multimeter to check the voltage at the camera connector.
Confirm that the voltage is within the manufacturer's specifications (usually around 12V).
If no power is present, trace the wiring back to the fuse box to check for blown fuses or damaged wires.

5. Replace Camera (if necessary)

If the camera is confirmed faulty, remove the old camera by unscrewing it from its mount.
Install the new rear view camera by reversing the removal steps.
Ensure the camera is aligned correctly and securely fastened.