FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix the interior lights staying on in my Tesla Outback 6th Generation (2020-2024) - Subaru Outback
Home/Cars/Subaru/Outback/6th Generation (2020-2024)/how to fix the interior lights staying on in my Tesla Outback 6th Generation (2020-2024)

how to fix the interior lights staying on in my Tesla Outback 6th Generation (2020-2024)

Subaru Outback 6th Generation (2020-2024)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
524 words

Problem Statement

Learn how to fix interior lights staying on in Tesla Outback 2020-2024. Step-by-step guide with diagnostic steps and repair instructions.

Affected Component
Electrical
Estimated Time
1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical components to prevent shocks or shorts.

Symptoms

  • •Interior lights remain illuminated when the vehicle is off
  • •Battery drain occurs due to lights being on
  • •Dome light does not turn off when doors are closed
  • •Possible illumination of door panels or footwell lights
  • •Warning message on the dashboard (if applicable)

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Screwdriver set
  • •Socket set
  • •Panel removal tool

Parts Required

  • •Replacement door switches (if faulty)
  • •Wiring harness (if damaged)

Additional Information

Affected Component
Electrical
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked in a safe location and is turned off.
  • Disconnect the battery to prevent any electrical shorts during repair.
2. Inspect Door Switches
  • Locate the door switches on each door.
  • Remove the door panel if necessary to access the switch.
  • Clean and test the switch with a multimeter:
    • Measure continuity when the switch is pressed.
    • Replace any faulty switches with new ones.
  • Reassemble the door panel if removed.
3. Adjust Interior Light Settings
  • Access the vehicle's settings via the touchscreen.
  • Navigate to the "Interior Lights" section.
  • Adjust the timer settings for lights to turn off after closing the doors or after a set period.
  • Save the settings and exit.
4. Check for Error Codes
  • Connect the OBD-II scanner to the vehicle’s port.
  • Scan for any trouble codes related to the interior lighting system.
  • If codes are found, research the specific code for further troubleshooting instructions.
  • Clear the codes and recheck if the problem persists.
5. Verify Electrical Connections
  • Inspect the battery terminals for corrosion and tighten any loose connections.
  • Check the wiring harnesses related to the interior lighting system for any signs of damage.
  • Repair or replace any damaged wires as necessary.