how to clean the throttle body on Tesla Outback 6th Generation (2020-2024)

Solution

1. Preparation

• Tools Required: Flathead screwdriver, Torx screwdriver set, cleaning cloths, throttle body cleaner, safety goggles, gloves.
• Safety Warnings: Disconnect the negative battery terminal to prevent electrical shorts. Allow the engine to cool before beginning work.

2. Access the Throttle Body

1. Open the hood and locate the air intake duct connected to the throttle body.
2. Remove any clips or screws securing the intake duct using the appropriate screwdriver.
3. Carefully detach the air intake duct from the throttle body to gain access.

3. Clean the Throttle Body

1. Spray throttle body cleaner directly onto the throttle plate and surrounding areas while holding the throttle plate open with your hand or using a safe tool.
2. Use a clean cloth or a soft-bristle brush to gently scrub away any carbon buildup or deposits around the throttle plate and inside the throttle body.
3. Wipe down the entire throttle body interior to ensure all cleaning fluid and debris are removed.

4. Reassemble

1. Reattach the air intake duct to the throttle body and secure it with the clips or screws removed earlier.
2. Double-check that all connections are tight and there are no loose components.
3. Reconnect the negative battery terminal.