why does my key fob not work for my Tesla Outback 5th Generation (2015-2019)

Subaru Outback 5th Generation (2015-2019)

Error Codes

15-30 minutes

Time

medium

Difficulty

medium

Severity

3 min read

468 words

Problem Statement

Learn how to diagnose and fix a non-working key fob for Tesla Outback 5th Generation (2015-2019). Step-by-step guide with symptoms and solutions.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Be cautious when using tools to avoid damaging the key fob casing or internal components.

Symptoms

•Key fob does not respond when buttons are pressed
•Vehicle does not unlock or lock with key fob
•Indicator light on key fob does not illuminate
•Key fob not recognized by the vehicle
•Battery warning on the vehicle's dashboard

Diagnostic Steps

1
Check the battery level of the key fob by replacing it with a new one.
2
Inspect the key fob for physical damage or signs of wear.
3
Verify that the vehicle's key fob receiver is functioning by attempting to unlock/lock the vehicle with another key fob, if available.
4
Use an OBD-II scanner to check for any relevant error codes related to the keyless entry system.
5
Ensure that the vehicle is within the operational range of the key fob when attempting to use it.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Small flat-head screwdriver
•New key fob battery (CR2032 or equivalent)

Parts Required

•Key fob battery (CR2032 or equivalent)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the battery level of the key fob by replacing it with a new one.
2
Inspect the key fob for physical damage or signs of wear.
3
Verify that the vehicle's key fob receiver is functioning by attempting to unlock/lock the vehicle with another key fob, if available.
4
Use an OBD-II scanner to check for any relevant error codes related to the keyless entry system.
5
Ensure that the vehicle is within the operational range of the key fob when attempting to use it.

Solution

1. Preparation

Gather necessary tools: a small flat-head screwdriver, a new key fob battery (CR2032 or equivalent).
Ensure you are in a well-lit, dry area to work on the key fob.

2. Replace Key Fob Battery

Use the small flat-head screwdriver to gently pry open the key fob casing.
Remove the old battery carefully, taking note of the orientation (positive and negative sides).
Insert the new battery in the same orientation as the old one.
Snap the key fob casing back together until it clicks securely.

3. Reprogram Key Fob (if necessary)

Sit inside the vehicle and close all doors.
Insert the key into the ignition (if equipped) and turn it to the "On" position without starting the engine.
Press and hold the lock button on the key fob for about 5 seconds.
Turn the ignition back to the "Off" position and remove the key.
Test the key fob to ensure it is functioning properly.