Tesla Outback 5th Generation (2015-2019) steering wheel shakes when braking why

Subaru Outback 5th Generation (2015-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

435 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix steering wheel shaking when braking in Tesla Outback (2015-2019). Step-by-step guide with symptoms, diagnostics, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on the braking system.
•Allow the brakes to cool before performing any inspections or repairs.

Symptoms

•Steering wheel shakes or vibrates when brakes are applied
•Pulsation felt through the brake pedal
•Increased stopping distance
•Uneven wear on brake pads or tires
•Noise coming from the brake area during braking

Diagnostic Steps

1
Inspect brake pads and rotors for wear or damage.
2
Check wheel alignment and balance.
3
Examine suspension components for wear or damage.
4
Scan for any error codes related to the braking system.
5
Measure rotor runout using a dial indicator.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Jack and jack stands
•Torque wrench
•Dial indicator

Parts Required

•Brake pads
•Brake rotors

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface and engage the parking brake.

2. Inspect and Replace Brake Components

Remove the Wheel
- Loosen lug nuts with a socket set.
- Lift the vehicle with a jack and secure it on jack stands.
- Remove the wheel.
Inspect Brake Pads and Rotors
- Check brake pads for thickness; replace if below manufacturer specifications.
- Measure rotor thickness and inspect for warping or scoring.
- If rotors are warped, replace them.
Install New Brake Pads and Rotors (if necessary)
- Remove the caliper using a socket set.
- Replace the rotor and install new brake pads.
- Reinstall the caliper and torque to manufacturer specifications.

3. Align and Balance Wheels

Check Wheel Balance
- Remove the wheel and take it to a tire shop to check for balance issues.
- Balance the wheel if needed.
Perform Wheel Alignment
- Use an alignment machine to check and adjust wheel alignment according to manufacturer specifications.