my Tesla Outback 5th Generation (2015-2019) keyless entry is not working what can I do

Subaru Outback 5th Generation (2015-2019)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

531 words

Problem Statement

Learn how to diagnose and fix keyless entry issues in Tesla Outback 2015-2019. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on the electrical system to avoid shorts.

Symptoms

•Key fob is unresponsive
•Vehicle does not unlock when approaching with the key fob
•No sound or light indication when pressing the key fob buttons
•Manual unlocking of doors works, but electronic entry does not
•Check keyless entry system error message displayed on the dashboard

Diagnostic Steps

1
Inspect the key fob for physical damage or signs of wear.
2
Replace the battery in the key fob to ensure it has sufficient power.
3
Use an OBD-II scanner to check for any error codes related to the keyless entry system.
4
Check the vehicle's central locking system fuse for any blown fuses.
5
Verify that the key fob is programmed to the vehicle by attempting to reprogram it if necessary.
6
Test the keyless entry system with a spare key fob.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Small flat-head screwdriver
•Multimeter
•OBD-II scanner
•Fuse puller

Parts Required

•New key fob battery (CR2032)
•Replacement fuse (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the key fob for physical damage or signs of wear.
2
Replace the battery in the key fob to ensure it has sufficient power.
3
Use an OBD-II scanner to check for any error codes related to the keyless entry system.
4
Check the vehicle's central locking system fuse for any blown fuses.
5
Verify that the key fob is programmed to the vehicle by attempting to reprogram it if necessary.
6
Test the keyless entry system with a spare key fob.

Solution

1. Preparation

Gather necessary tools: small flat-head screwdriver, multimeter, new key fob battery (typically CR2032), and OBD-II scanner.
Ensure the vehicle is parked in a well-ventilated area and the ignition is turned off.

2. Replace Key Fob Battery

Sub-steps:
1. Open the key fob using a small flat-head screwdriver to gently pry apart the two halves.
2. Remove the old battery and check its voltage using a multimeter (should read around 3 volts).
3. Insert the new battery, ensuring the positive side is facing the correct direction.
4. Snap the key fob halves back together securely.

3. Inspect and Replace Fuse

Tools Required: Fuse puller (if available).
Sub-steps:
1. Locate the vehicle's fuse box (refer to the owner's manual for the exact location).
2. Identify the fuse associated with the keyless entry system and inspect it visually.
3. If the fuse is blown, replace it with a new fuse of the same amperage rating.
4. Recheck the functionality of the keyless entry system.

4. Reprogram Key Fob (if necessary)

Sub-steps:
1. Enter the vehicle and close all doors.
2. Insert the key into the ignition and turn it to the "On" position without starting the engine.
3. Follow the specific reprogramming procedure outlined in the owner's manual (usually involves pressing a sequence of buttons on the fob).
4. Test the keyless entry function after reprogramming.