my Tesla Outback 5th Generation (2015-2019) fog lights won't turn on what's wrong

Subaru Outback 5th Generation (2015-2019)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

553 words

Problem Statement

Learn how to diagnose and fix non-functional fog lights in a 2015-2019 Tesla Outback. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components to prevent short circuits.

Symptoms

•Fog lights do not turn on when activated
•Fog light indicator on the dashboard is not illuminated
•No unusual noises or flickering from the fog light assembly
•Other exterior lights (headlights, turn signals) are functioning properly

Diagnostic Steps

1
Check the fog light switch to ensure it is in the 'on' position.
2
Inspect the fog light bulbs for signs of damage or burnout.
3
Use an OBD-II scanner to check for any related error codes.
4
Verify the fog light fuse is intact by inspecting the fuse box and testing with a multimeter if necessary.
5
Inspect the fog light wiring harness for any visible damage or corrosion.
6
Test the fog light relay for functionality by swapping it with a similar relay in the fuse box.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Screwdriver set
•Safety gloves

Parts Required

•Fog light bulbs (if burned out)
•Fog light fuse (if blown)
•Fog light relay (if defective)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the fog light switch to ensure it is in the 'on' position.
2
Inspect the fog light bulbs for signs of damage or burnout.
3
Use an OBD-II scanner to check for any related error codes.
4
Verify the fog light fuse is intact by inspecting the fuse box and testing with a multimeter if necessary.
5
Inspect the fog light wiring harness for any visible damage or corrosion.
6
Test the fog light relay for functionality by swapping it with a similar relay in the fuse box.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface and the engine is turned off.
Disconnect the negative terminal of the battery for safety.

2. Check and Replace Fog Light Bulbs

Tools Required: Screwdriver set, safety gloves
Remove the fog light assembly by unscrewing the mounting screws.
Disconnect the wiring harness from the fog light.
Remove the old bulb by twisting it counterclockwise and pulling it out.
Insert the new bulb into the socket and twist it clockwise to secure.
Reconnect the wiring harness and reinstall the fog light assembly.

3. Inspect and Replace Fog Light Fuse

Tools Required: Multimeter or fuse puller
Locate the fog light fuse in the vehicle's fuse box (refer to the owner's manual).
Remove the fuse and inspect it visually or test it with a multimeter to confirm it’s blown.
If the fuse is blown, replace it with one of the same amperage rating (refer to the owner's manual for specifications).

4. Test Fog Light Relay

Tools Required: None
Locate the fog light relay in the fuse box.
Remove the relay and inspect for any signs of damage.
If necessary, swap the relay with another relay of the same type in the fuse box to test functionality.
Reinstall the original relay if it appears functional or replace it if it is defective.