how to reset the warning lights on Tesla Outback 5th Generation (2015-2019)

Subaru Outback 5th Generation (2015-2019)

Error Codes

10-30 minutes

Time

easy

Difficulty

medium

Severity

2 min read

385 words

Problem Statement

Learn how to reset warning lights on Tesla Outback 5th Generation (2015-2019). Step-by-step guide with diagnostic procedures and solutions.

Affected Component

Electrical

Estimated Time

10-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' and the ignition is off before working on the battery.

Symptoms

•Warning lights illuminated on the dashboard
•Potential error messages displayed on the screen
•Vehicle may not respond to certain functions due to safety features
•Loss of certain vehicle functionalities until warnings are cleared

Diagnostic Steps

1
Check the vehicle's manual for specific warning light meanings.
2
Use the touchscreen to navigate to the 'Service' or 'Settings' menu.
3
Locate the option to reset warnings or perform a system reset.
4
If applicable, disconnect the vehicle's battery for a few minutes to reset the system.
5
Reconnect the battery and check if the warning lights are cleared.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•No specific tools required for resetting through the touchscreen
•Socket wrench (only needed for battery disconnect)

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the vehicle's manual for specific warning light meanings.
2
Use the touchscreen to navigate to the 'Service' or 'Settings' menu.
3
Locate the option to reset warnings or perform a system reset.
4
If applicable, disconnect the vehicle's battery for a few minutes to reset the system.
5
Reconnect the battery and check if the warning lights are cleared.

Solution

1. Preparation

Ensure the vehicle is in a safe location with the ignition off.
Gather necessary tools: No specific tools required for the reset.

2. Using the Touchscreen

Turn on the vehicle and access the main menu on the touchscreen.
Go to the 'Service' or 'Settings' menu.
Look for an option labeled 'Reset Warning Lights' or similar.
Follow the prompts on the screen to confirm the reset.
Exit the menu and verify that the warning lights are off.

3. Battery Disconnect (if necessary)

Open the hood and locate the battery.
Using a socket wrench, disconnect the negative (-) terminal of the battery.
Wait for at least 10 minutes to ensure all systems are fully reset.
Reconnect the negative (-) terminal securely.
Start the vehicle and check if the warning lights have cleared.