how to reset the tire pressure monitoring system in Tesla Outback 5th Generation (2015-2019)?

Subaru Outback 5th Generation (2015-2019)

Error Codes

30-60 minutes

Time

medium

Difficulty

medium

Severity

3 min read

468 words

Problem Statement

Learn how to reset the TPMS in a 2015-2019 Subaru Outback. Step-by-step guide with symptoms, diagnostic steps, and tools required for effective tire pressure monitoring.

Affected Component

Electrical

Estimated Time

30-60 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked safely and the engine is off before performing checks.

Symptoms

•TPMS warning light illuminated on the dashboard
•Inaccurate tire pressure readings displayed
•Warning message indicating low tire pressure
•Tire pressure light does not turn off after adjusting pressure
•Difficulty in resetting the TPMS after tire service

Diagnostic Steps

1
Verify that all tires are inflated to the manufacturer's recommended pressure.
2
Check for any visible damage or leaks in the tires.
3
Inspect the TPMS sensors for proper operation and battery status.
4
Use an OBD-II scanner to check for any related error codes.
5
Confirm that the vehicle is in the correct mode to perform the TPMS reset.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•OBD-II scanner

Parts Required

•None required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Verify that all tires are inflated to the manufacturer's recommended pressure.
2
Check for any visible damage or leaks in the tires.
3
Inspect the TPMS sensors for proper operation and battery status.
4
Use an OBD-II scanner to check for any related error codes.
5
Confirm that the vehicle is in the correct mode to perform the TPMS reset.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Gather necessary tools including the vehicle owner's manual for reference.

2. Inflate Tires

Verify and inflate all tires (including the spare) to the recommended pressure (usually found on the driver's door jamb).
Use a tire pressure gauge to measure the pressure accurately.

3. Reset the TPMS

Method 1 (Using the Vehicle Menu):
1. Start the vehicle.
2. Navigate to the vehicle settings on the display screen.
3. Select the "Tire Pressure" or "TPMS" option.
4. Follow prompts to reset the TPMS.
Method 2 (Manual Reset):
1. Turn the ignition to the "On" position but do not start the engine.
2. Press and hold the TPMS reset button located under the steering wheel or near the fuse box (refer to the owner's manual for exact location).
3. Hold the button until the TPMS light blinks three times, then release it.
4. Start the vehicle and check if the TPMS warning light is off.

4. Final Check

After resetting, monitor the dashboard for any warning lights.
Drive the vehicle for a short distance to ensure the system recalibrates.