how to reset the maintenance light on Tesla Outback 5th Generation (2015-2019)

Subaru Outback 5th Generation (2015-2019)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

352 words

Problem Statement

Learn how to reset the maintenance light on Tesla Outback (2015-2019) with this step-by-step guide. Ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' before performing the reset to avoid unintended movement.

Symptoms

•Maintenance light illuminated on the dashboard
•Notification indicating maintenance is due
•No other warning lights present

Diagnostic Steps

1
Ensure the vehicle is in the 'On' position without starting the engine.
2
Access the vehicle's settings via the touchscreen interface.
3
Navigate to the 'Service' menu from the main screen.
4
Look for the option labeled 'Reset Maintenance Light' or similar.
5
Confirm the reset action when prompted.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required, as the process is performed via the touchscreen interface.

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface and is in "Park" mode.
Gather the vehicle key fob to access the interior settings.

2. Access Touchscreen

Turn the vehicle's power on by pressing the brake pedal and using the key fob to enter the cabin.
Wait for the central touchscreen to power up fully.

Tap on the "Service" icon located in the main menu on the touchscreen.
Scroll through the available options until you find "Maintenance."

4. Reset Maintenance Light

Select the "Reset Maintenance Light" option.
Confirm your selection when prompted to ensure the reset takes place.

Once the reset is confirmed, exit the service menu and turn off the vehicle to complete the process.