how to reset the infotainment system on my Tesla Outback 5th Generation (2015-2019)

Subaru Outback 5th Generation (2015-2019)

Error Codes

30 minutes

Time

medium

Difficulty

medium

Severity

3 min read

468 words

Problem Statement

Learn how to reset the infotainment system on your 2015-2019 Subaru Outback. Step-by-step guide to troubleshoot and restore functionality.

Affected Component

Electrical

Estimated Time

30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked safely before performing any resets or inspections.

Symptoms

•Infotainment screen is frozen or unresponsive
•Audio system not functioning
•Navigation system shows errors or fails to load
•Bluetooth connectivity issues
•Slow response to touch inputs

Diagnostic Steps

1
Check for any visible damage or loose connections at the infotainment system.
2
Verify that the vehicle's battery is fully charged and that there are no electrical issues.
3
Inspect the fuse related to the infotainment system using the owner's manual for location.
4
Confirm that the software of the infotainment system is up-to-date by checking for available updates.
5
Perform a soft reset by holding down the appropriate buttons.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Flathead screwdriver

Parts Required

•Replacement fuse

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check for any visible damage or loose connections at the infotainment system.
2
Verify that the vehicle's battery is fully charged and that there are no electrical issues.
3
Inspect the fuse related to the infotainment system using the owner's manual for location.
4
Confirm that the software of the infotainment system is up-to-date by checking for available updates.
5
Perform a soft reset by holding down the appropriate buttons.

Solution

1. Preparation

Gather necessary tools such as a flathead screwdriver (if needed for accessing fuses).
Ensure the vehicle is parked, and the ignition is turned to the "ON" position without starting the engine.

2. Perform a Soft Reset

Locate the "Power" and "Home" buttons on the infotainment screen.
Press and hold both buttons simultaneously for about 10-15 seconds until the Subaru logo appears on the screen.
Release the buttons once the logo is displayed, allowing the system to reboot.

3. Check Software Updates

Once the system has restarted, navigate to the settings menu on the infotainment screen.
Select "Software Update" or "System Update" to check for any available updates.
If an update is found, follow the prompts to install it, ensuring the vehicle remains on during the update.

4. Inspect Fuses (if necessary)

Turn off the ignition and remove the key.
Locate the fuse box, usually found under the dashboard or in the engine compartment.
Using the owner's manual, identify the fuse related to the infotainment system.
Check the fuse for continuity and replace it if it is blown.