how to reset lane departure warning on Tesla Outback 5th Generation (2015-2019)

Subaru Outback 5th Generation (2015-2019)

Error Codes

30 minutes to 1 hour

Time

medium

Difficulty

medium

Severity

3 min read

487 words

Problem Statement

Learn how to reset the lane departure warning on Tesla Outback (2015-2019). Step-by-step guide with symptoms, diagnostic steps, and safety tips.

Affected Component

Electrical

Estimated Time

30 minutes to 1 hour

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' mode before attempting any resets or updates.

Symptoms

•Lane departure warning light illuminated on the dashboard
•Beeping alert when driving near lane markings
•Lane assist feature not activating
•Inconsistent lane departure warnings
•System settings inaccessible through the vehicle's menu

Diagnostic Steps

1
Check the vehicle's software version to ensure it is up to date.
2
Verify if the lane departure warning feature is enabled in the vehicle settings.
3
Inspect the front-facing camera and sensors for any obstructions or damage.
4
Review the owner's manual for specific reset instructions related to the lane departure warning system.
5
Attempt to restart the vehicle's computer by powering it off and then on again.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Smartphone or tablet

Parts Required

•None required for reset procedure; however, ensure no obstructions on sensors.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the vehicle's software version to ensure it is up to date.
2
Verify if the lane departure warning feature is enabled in the vehicle settings.
3
Inspect the front-facing camera and sensors for any obstructions or damage.
4
Review the owner's manual for specific reset instructions related to the lane departure warning system.
5
Attempt to restart the vehicle's computer by powering it off and then on again.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Put the vehicle in 'Park' mode and engage the parking brake.
Gather necessary tools: OBD-II scanner (if needed for diagnostics), smartphone or tablet (for software updates).

2. Update Software

Connect the vehicle to Wi-Fi.
Access the "Software" menu on the touchscreen display.
Check for updates and install if necessary, following on-screen prompts.

3. Reset Lane Departure Warning

Navigate to the "Settings" menu on the touchscreen.
Select “Autopilot” or “Driver Assistance.”
Locate the “Lane Departure Warning” option.
Toggle the setting off, wait a few moments, and then toggle it back on.
Confirm any prompts to save changes.

4. Calibration (if needed)

Drive the vehicle in a straight line on a flat road, maintaining a consistent speed to allow the system to recalibrate.
Ensure that the front-facing camera is unobstructed during this process.

5. Verify Functionality

After resetting, test the lane departure warning by driving near lane markings to ensure alerts are functioning properly.