how to fix P0301 misfire code in Tesla Outback 5th Generation (2015-2019)

Solution

1. Preparation

• Gather tools and parts required for the repair.
• Disconnect the vehicle battery to ensure safety while working on electrical components.

2. Inspect and Replace Spark Plug

• Remove the engine cover if necessary.
• Locate the spark plug in cylinder 1.
• Use a spark plug socket and ratchet to remove the spark plug.
• Inspect the spark plug for wear, carbon build-up, or damage.
• Replace with a new spark plug that meets manufacturer specifications (e.g., NGK or Denso).
• Torque the new spark plug to the manufacturer's specification (typically around 13-15 ft-lbs).

3. Inspect and Replace Ignition Coil

• Disconnect the electrical connector from the ignition coil.
• Remove the bolt securing the ignition coil using a socket wrench.
• Carefully pull the ignition coil out of the spark plug tube.
• Inspect the coil for cracks or corrosion.
• Replace with a new ignition coil compatible with Tesla Outback.
• Reinstall and secure the ignition coil, ensuring the electrical connector clicks into place.

4. Check and Clean Fuel Injector

• Remove the fuel rail if necessary to access the injector for cylinder 1.
• Disconnect the fuel injector connector.
• Use a fuel injector cleaning kit or service to clean the injector.
• Reinstall the fuel injector, ensuring it seats properly.
• Reconnect the fuel injector connector.

5. Final Assembly and Battery Connection

• Reinstall any components removed during the process (engine cover, fuel rail, etc.).
• Reconnect the vehicle battery.
• Start the engine and allow it to idle.