how to fix a power window issue on Tesla Outback 5th Generation (2015-2019)

Subaru Outback 5th Generation (2015-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

536 words

Problem Statement

Learn how to diagnose and fix power window issues in Tesla Outback 5th Generation (2015-2019). Step-by-step guide with tools and parts required.

Affected Component

Electrical

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Use caution when handling glass components to avoid injury.

Symptoms

•Power window does not respond when the switch is activated
•Window only moves partially or remains stuck
•Unusual noises when operating the window
•Driver's side window functions normally while others do not
•Control panel lights flicker when pressing the window switch

Diagnostic Steps

1
Inspect the window switch for any visible damage or debris.
2
Check the vehicle's fuse box for blown fuses related to the power window circuit.
3
Test the power window motor by applying direct power to see if it operates.
4
Scan the vehicle's computer for any error codes related to the window system.
5
Inspect wiring harness connections to the window motor and switches for damage or corrosion.
6
Check for any obstructions in the window track or seals that may prevent movement.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Flathead screwdriver
•Socket set
•Torque wrench
•Multimeter

Parts Required

•Power window motor (if faulty)
•Window regulator (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the window switch for any visible damage or debris.
2
Check the vehicle's fuse box for blown fuses related to the power window circuit.
3
Test the power window motor by applying direct power to see if it operates.
4
Scan the vehicle's computer for any error codes related to the window system.
5
Inspect wiring harness connections to the window motor and switches for damage or corrosion.
6
Check for any obstructions in the window track or seals that may prevent movement.

Solution

1. Preparation

Gather necessary tools and components.
Disconnect the car battery to prevent electrical shock.
Ensure the vehicle is parked on a level surface.

2. Remove Door Panel

Use a flathead screwdriver to carefully pry off any trim pieces around the door panel.
Remove screws securing the door panel using a socket set.
Gently pull the door panel away from the door frame, disconnecting any electrical connectors for the window switch and speakers.

3. Inspect and Replace Window Motor (if necessary)

Locate the power window motor; it will be attached to the window regulator.
Disconnect the motor's electrical connector.
Remove the motor from the regulator by unscrewing any retaining screws.
If the motor is faulty, install a new motor by reversing the removal steps, ensuring it is securely fastened.
Reconnect the electrical connector to the new motor.

4. Check Window Regulator

Inspect the window regulator for signs of wear or damage; replace if necessary.
If replacing, remove the old regulator by unscrewing it from the door frame.
Install the new regulator and secure it with screws.

5. Reassemble Door Panel

Reconnect any electrical connectors to the door panel components.
Align the door panel with the door frame and press it back into place.
Reinstall any screws and trim pieces removed during disassembly.
Reconnect the vehicle battery.