why are my power windows not working on my Tesla Outback 4th Generation (2010-2014)?

Subaru Outback 4th Generation (2010-2014)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

459 words

Problem Statement

Learn how to diagnose and fix power window issues in Tesla Outback 4th Generation (2010-2014). Step-by-step guide with symptoms and solutions.

Affected Component

Electrical

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to prevent shocks or shorts.

Symptoms

•Power window switches do not activate the windows.
•No sound or movement from the window motors.
•Window locks are not functioning, preventing window operation.
•Interior lights may flicker when switches are pressed.
•Driver’s window may work while others do not.

Diagnostic Steps

1
Verify that the vehicle's battery is fully charged and in good condition.
2
Inspect the power window fuse for continuity using a multimeter.
3
Check the power window relay operation.
4
Use an OBD-II scanner to check for any related fault codes.
5
Remove the door panel to inspect the window motor and wiring for damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Multimeter
•Flathead screwdriver
•Door panel removal tool

Parts Required

•Power window fuse (if blown)
•Power window relay (if faulty)
•Window motor (if defective)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Verify that the vehicle's battery is fully charged and in good condition.
2
Inspect the power window fuse for continuity using a multimeter.
3
Check the power window relay operation.
4
Use an OBD-II scanner to check for any related fault codes.
5
Remove the door panel to inspect the window motor and wiring for damage.

Solution

1. Preparation

Gather tools and parts needed for the repair.
Disconnect the vehicle's battery to ensure safety.
Tools Required: Socket set, multimeter, flathead screwdriver, door panel removal tool.

2. Inspect the Fuse

Locate the fuse box in the vehicle.
Remove the cover and locate the power window fuse.
Test the fuse with a multimeter for continuity.
- If the fuse is blown, replace it with one of the same amperage.

3. Check the Relay

Locate the power window relay in the fuse box.
Remove the relay and test it for proper function using a multimeter.
- If the relay is faulty, replace it with a new relay.

4. Inspect Wiring and Window Motor

Remove the door panel using a door panel removal tool.
Inspect all wiring connected to the window motor for any signs of wear or damage.
Test the window motor directly by applying 12V power from a battery to check if the motor operates.
- If the motor doesn’t work, replace the window motor.

5. Reassemble and Test

Reattach the door panel securely.
Reconnect the vehicle’s battery.
Test the power windows for proper operation.