FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the oil change light on Tesla Outback 4th Generation (2010-2014) - Subaru Outback
Home/Cars/Subaru/Outback/4th Generation (2010-2014)/how to reset the oil change light on Tesla Outback 4th Generation (2010-2014)

how to reset the oil change light on Tesla Outback 4th Generation (2010-2014)

Subaru Outback 4th Generation (2010-2014)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
342 words

Problem Statement

Learn how to reset the oil change light on a 2010-2014 Subaru Outback. Step-by-step guide for a quick and easy reset process.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' or 'Neutral' and on a flat surface before starting the reset process.

Symptoms

  • •Oil change light remains illuminated on the dashboard
  • •Maintenance reminder message displayed on the instrument cluster
  • •Vehicle may indicate overdue for maintenance

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None specifically required for this procedure.

Parts Required

  • •None required for this procedure.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked on a level surface.
  • Have the vehicle in the "On" position (do not start the engine).
2. Reset Process

  1. Access the Instrument Cluster:

    • Turn the ignition to the "On" position. Do not start the engine.

  2. Press and Hold the Trip Button:

    • Locate the "Trip" button on the dashboard.
    • Press and hold the "Trip" button for about 5 seconds until the display starts to change.

  3. Verify Reset:

    • Release the "Trip" button and check the dashboard display.
    • The oil change light should turn off, indicating the reset was successful.

  4. Turn Off Ignition:

    • Turn the ignition off and then back on to verify the oil change light is no longer illuminated.